Release Notes for P4, the Helix Core Command Line client, P4D, the Helix Core Server P4P, the Helix Core Proxy Server and P4Broker, the Helix Core Broker Version 2024.2 Introduction This document lists all user-visible changes to: * Helix Core Server (P4D) * Helix Core Command Line client (P4) * Helix Core Proxy Server (P4P) * Helix Core Broker (P4Broker) in the 2024.2 release. Release notes for other Perforce products are at https://www.perforce.com/support/release-notes which includes a link to the developer notes for the Helix Core API for C/C++ at https://www.perforce.com/perforce/doc.current/user/p4devnotes.txt Perforce numbers releases YYYY.R/CCCCC, e.g. 2002.1/30547. YYYY is the year; R is the release of that year; CCCCC is the bugfix change level. Each bugfix in these release notes is marked by its change number. Any build includes (1) all bugfixes of all previous releases and (2) all bugfixes of the current release up to the bugfix change level. Both 'p4' and 'p4d' will report their version information by passing the '-V' flag. Additionally, 'p4' can report the server's information with the 'p4 info' command. Version information includes a release version and a build change number. The build change number can be compared with change numbers and patch information mentioned in the matching version release notes file to determine if a particular build of a version includes the change mentioned. Supported Platforms for p4d, p4, p4p and p4broker Linux kernel 2.6+ (glibc 2.6+) for Intel(x86_64) Linux kernel 2.6+ (glibc 2.17+) for ARM(aarch64) Windows 10 for Intel(x64) Windows 11 for Intel(x64) Windows 2016 for Intel(x64) Windows 2019 for Intel(x64) Windows 2022 for Intel(x64) Apple OS X 10.12+ for Intel(x86_64) MacOS 12+ for Apple silicon (arm64) -------------------------------------------------------------------------- Important Platform End-of-Life Notice This notice identifies the platforms that will be placed in End-of-Life (EOL) status in November 2024. This applies to p4, p4d, p4p, and p4broker components of the server release. The following 64-bit platforms are now in the Discontinued phase: Windows 2012 for Intel(x64) OBSOLESCENT Phase: Starting with this release, these platforms will no longer be supported. Customers will receive full support and patches for the deprecated platforms during this phase for older releases. The platforms will remain in this phase until May 2025 after which they will transition into the discontinued phase. DISCONTINUED (EOL) Phase: Patches will no longer be issued for these platforms. We will no longer provide technical support to customers with servers on these platforms -------------------------------------------------------------------------- Important Changes to Helix Core Licenses Helix Core licenses have been modified to include an 'ExtraCapabilities' field. This field encapsulates details about the license for this server as well as additional applications that extend this Helix Core Server. Please note, a comprehensive list of possible values is not provided as the list will evolve over time and, as with other fields in the license, any modifications to the 'ExtraCapabilities' field will invalidate the license. This new license format requires an updated version of the Helix Core Server to be able to read and apply this new license. License files that use this new field require an updated version of the Helix Core Server and include the following comment specifying the exact versions required: # This license works with 2019.2 patch 14, 2020.1 patch 8, 2020.2 patch 6, 2021.1 patch 1, 2021.2 or later servers. -------------------------------------------------------------------------- Important limitation for Windows servers prior to 2021.2 Support for Helix Core Extensions was disabled for Windows servers prior to 2021.2 due to unrelated performance concerns on that platform requiring a conflicting toolchain change. Extensions remained fully supported on Linux and Mac. This limitation has been resolved in 2021.2 and extensions are now fully supported on all supported platforms. -------------------------------------------------------------------------- Important security note This release links OpenSSL version 3.0.15 -------------------------------------------------------------------------- Important export note This product is subject to U.S. export control laws and regulations including, but not limited to, the U.S. Export Administration Regulations, the International Traffic in Arms Regulation requirements, and all applicable end-use, end-user and destination restrictions. Licensee shall not permit, directly or indirectly, use of any Perforce technology in or by any U.S. embargoed country or otherwise in violation of any U.S. export control laws and regulations. -------------------------------------------------------------------------- Upgrading the Server ** IMPORTANT UPGRADE NOTES ** CHANGES TO DISTRIBUTED UPGRADE RECOMMENDATIONS For 2019.1 or later of the Helix Core Server (P4D), significant schema upgrades performed by 'p4d -xu' will only be performed on servers where those upgrades are needed. This means that metadata changes made by upgrades must be replicated and so must be journaled. To help prevent mistakes, upgrades will not run if journaling is disabled. If offline databases are in use, upgrades should not be performed on them, as the upgrade performed on the live database will be journaled and applied during normal journal replay. When upgrading from 2019.1 or later of the Helix Core Server (P4D), replicas may be upgraded safely prior to the server they are replicating from. This upgrade pattern, referred to as "outside-in", allows a multi-server environment be upgraded server-by-server starting with the outermost replica, without requiring the entire set of servers to be taken offline at once. When upgrading from a version prior to 2019.1 to 2019.1 or later, we strongly recommend that all servers are upgraded in a single upgrade session. More information can be found in the Helix Core Server Administrator Guide at https://www.perforce.com/manuals/p4sag/Content/P4SAG/chapter.upgrade.html ------------------------------------------------------------------- CHANGES TO UNLICENSED SERVER For v16.1 onwards of the Helix Core Server (P4D) the number of free users allowed with an unlicensed server has changed to 5, the number of clients remains at 20. Previous versions of the server will continue to support the 20/20 usage allowance. ------------------------------------------------------------------- BEFORE UPGRADING To upgrade your Helix Core Server (P4D), your license file must be current. Expired licenses do not work with upgraded servers. In addition to your usual checkpointing scheme, always checkpoint your server immediately before undertaking an upgrade. For any Git Connector (formerly Helix4Git) instances that are currently polling repos we recommend upgrading your Git Connector instance before upgrading your Helix Core Server. Otherwise, any repo polling would cease. Read-only archive directories can interfere with the upgrade process. This may be the case for archive paths migrated from a different version control system, such as CVS, or in cases where 3rd party imported content has been made read only by a system admin. Make sure all such archive paths are writeable before attempting the upgrade. DOWNGRADING A 2024.2 SERVER IS NOT POSSIBLE UPGRADING PROCEDURE IS DIFFERENT DEPENDING ON WHAT YOUR CURRENT PERFORCE VERSION IS: UPDATE DATABASE SCHEMA vs UPDATE DATABASE FORMAT ------------------------------------------------------------------- ** UPDATE DATABASE SCHEMA If your current server version is 2013.3 or above, then this upgrade is a UPDATE DATABASE SCHEMA upgrade: Unix Platforms 1. Issue the 'p4d -r -J -xu' command. This command performs the significant schema upgrades, then exits. 2. Restart your server with your site's usual parameters. Windows Platforms 1. Issue the 'p4d -r -J -xu' command from a command prompt window. This command performs the significant schema upgrades, then exits. 2. Restart your Helix Core Server (P4D) service. Note: Personal DVCS servers will automatically perform any database schema upgrades. Although the upgrade steps described above are unnecessary for these servers, they are safe to run. ------------------------------------------------------------------- ** UPDATE DATABASE FORMAT If your current server version is 2013.2 or earlier, then this upgrade is an UPDATE DATABASE FORMAT upgrade: Due to the btree format introduced in 2013.3 this is not an UPDATE DATABASE SCHEMA upgrade. A checkpoint using your old server and then a restore using the 2021.1 server is required before the internal upgrades 'p4d -xu' (if required) can be performed. Note: If you have made use of the (undocumented) '+T' modifier (storing file content in the tiny.db database) this data is not checkpointed (and therefore not restored). See 'p4 help undoc' for backup/restore procedures for this table. Once the database has been restored with the 2021.1 version, update your database schema: Unix Platforms 1. Issue the 'p4d -r -J -xu' command. This command performs the schema upgrades, then exits. 2. Restart your server with your site's usual parameters. Windows Platforms 1. Issue the 'p4d -r -J -xu' command from a command prompt window. This command performs the schema upgrades, then exits. 2. Restart your Helix Core Server (P4D) service. -------------------------------------------------------------------------- Interoperating With Previous Releases 1. Unless stated otherwise, you can intermix any release of Helix Command Line (P4) with any release of the Helix Versioning Engine (P4D), but any functionality new to this release requires you to upgrade the client and/or P4D. See marks in the notes below. * -- requires new p4 client program including all client applications and derived APIs ** -- requires new p4d server program *** -- requires new p4p proxy program **** -- requires new p4broker broker program Any replica servers must be at least the same release level as the master server and any functionality that requires an upgrade for the master requires an upgrade for the replica. A replica can be running a later release than the master if the master is running at least 2019.1. However in this case some new functionality might not be available on the upgraded replica until the master has been upgraded. 2. Beginning with 99.2, remote depots will interoperate between UNIX and NT. Beginning with 98.2, remote depots will interoperate across (98.2 and higher) releases. In 98.1 and before, remote depots will only operate with another server of the same release. 3. As of 2005.1, remote depot support for 98.2 and 99.1 servers has been dropped. Attempts by 98.2 and 99.1 servers to contact 2005.1 servers still works, but the depots will appear devoid of files. -------------------------------------------------------------------------- Technology Preview features: Features offered in Technology Preview are experimental and not guaranteed to always work as expected. If you have feedback and functionality suggestions, email techpreview@perforce.com. The following features are in Technology Preview: Helix Core Client Extension (introduced 2019.1). 'p4 diagnostics" command (introduced 2024.2). The following features have been promoted from Technology Preview: 'p4 topology' command (introduced 2021.2). Helix Core Server System Resource Monitoring (introduced 2023.1). -------------------------------------------------------------------------- Important note: Please refer to: http://www.perforce.com/perforce/r24.2/user/relnotes.txt to get up to date GA and post-GA information about this release. -------------------------------------------------------------------------- Major new functionality in 2024.2 (2024.2/2675662) (2024/10/31) #2652338 (Job #120954) * ** The 'p4 sync' command now sends files of type 'binary+F' using delta transfer to improve performance. This builds on the delta transfer support added to 'p4 submit' in 2024.1 and uses the same configurables to tune the behavior. #2629301 (Job #121018) ** OpenTelemetry Logging Integration Structured logs may now be exported via OTLP to a range of log aggregation services. This works for structured logs in either CSV or JSON formats by configuring `p4 logexport` as a startup command (see 'p4 help logexport' for details). Logs will be exported in JSON format to avoid the log aggregator needing to be configured to parse the CSV structures. Log rotation will be followed and any log files still being exported will not be removed by the structured log's retention policy. #2622736 (Job #121117) * ** Support for 'hotfiles' with altsync clients. Files that match the criteria (path, size and/or type based) specified in the 'p4 hotfiles' spec will be transferred to the client during sync rather than the altsync agent creating placeholders to be hydrated later. See 'p4 help hotfiles' for more details. Technology Preview features 2024.2 (2024.2/2675662) (2024/10/31) #2652025 (Job #87744) ** A new command, 'p4 diagnostics', has been added to aid Perforce's support team to generate server diagnostics. Minor new functionality in 2024.2 (2024.2/2675662) (2024/10/31) #2659482 (Job #59679) ** JSON format structured logs, defined with the '.json' extension, are now supported. This includes compatibility with 'p4 logparse'. #2658019 (Job #122086) ** This change alters 'p4 changes' command to allow multiple -c options. Each -c value can include wildcards and possibly start with '-' to exclude changes with certain clients from the result. #2656556 (Job #121864) ** This change alters the -c option of 'p4 changes' to allow it to work as a search pattern possibly with wildcards. Adding a -E flag ( or the long --client-case-insensitive flag) makes the matching case-insensitive even on a case-sensitive server. Similar change is also applied to the -u option. Note that we can have multiple -u options and each can now be a search pattern that supports wildcards and can start with '-' to exclude specific users. The -E flag ( or the long --user-case-insensitive flag ) can be used to control case-sensitiveness. #2655555 (Job #122085) ** With this change the 'p4 changes' command allows multiple -u options to allow filtering of the results on multiple users. #2651326 (Job #119824) ** For 'p4 clients' the -u option can now work as a filter pattern possibly with wildcards. If wildcards are used the filter pattern should be enclosed in double quotes. This filter follows the server's normal case-sensitivity rules. Adding the --user-case-insensitive flag makes the matching case-insensitive, even on a case-sensitive server. Similar change is also applied to the -u option for the 'p4 labels' and 'p4 branches' commands. #2643597 (Jobs #120763, #120959) ** Enabled 'p4 unshelve -S //stream [-P //parent]' for sparse streams. A merge down may be required before unshelving from the parent stream. #2627572 (Jobs #119476, #119575) ** The command 'p4 journaldbchecksums -u unloadfile -t dbtable' now unload the files successfully for the partitioned-jnl have tables. #2623791 (Job #121131) ** *** **** SSL certificates that use EC, ED25519 or ED448 keys are now supported. #2621152 (Job #119512) ** 'p4d -xx' command can now be used to check the integrity between the tables 'db.working' and 'db.have.pt%pclient', where the later represents a specific partitioned have table. #2616805 (Job #38882) ** This change improves performance for the unlock command with force flag: 'p4 unlock -f -c '. #2614611 (Job #119863) ** This change introduces a new flag, '-l', for 'p4 obliterate'. When this flag is set the command will skip deleting db.label records for the purged files. This also introduces a new journal note, note number 33, to signal obliterate flags -l and -h to edge-servers. The new journal note has one parameter, an integer, that with value 1 signals -h and value=2 signals -l. Please note this functionality changes purge behavior on edge servers. The new journal note when sent without an -h flag will not purge records on that edge. #2601263 (Jobs #119311, #119719) ** The commands 'p4 attribute' and 'p4 fstat -Oa' could fail with 'Rpc buffer too big' errors if an attribute value size was too large (greater than 250MB). Now the command 'p4 attribute -I' which reads the attribute value from a file may be used for attribute values that would generate that error. In addition, the 'p4 print -T' command may now be used to print an attribute value that would generate that error from the 'p4 fstat -Oa' command. #2599011 (Job #66622) ** 'p4 clients -S stream' now supports wildcards. Bugs fixed in 2024.2 Patch 1 (2024.2/2697822) (2024/12/18) #2694774 (Job #123904) ** Deletion of a partitioned database table now deletes only the numbered partitioned directory. #2694762 (Job #123912) ** A partitioned database table path could be incorrectly parsed. This has been fixed. #2689409 (Job #123856) ** The 'svrRecType' topology field is no longer unset during replica restart when an upstream server is older than 2022.2. #2685672 (Job #123022) ** The sync operation no longer causes the database open error to occur on the db.sendq.pt database table. Bugs fixed in 2024.2 (2024.2/2675662) (2024/10/31) #2684738 (Job #123521) ** Clients of 'readonly' type now work correctly as revision specifiers. #2684730 (Job #123359) ** The commands 'p4d -K db.have.pt' and 'p4d -k db.have.pt' now exclude and include all the available partitioned have tables. #2684728 (Job #122687) ** Commands that specify multiple arguments using different partitioned clients as the revision specifiers will now return the correct results for each argument. #2672959 (Job #123250) ** Security fix. Addressed CVE-2024-10314, CVE-2024-10344 and CVE-2024-10345 #2667309 (Job #123015) ** Fixed locking order bug when obliterating a stream and the configurable index.domain.owner is 1. #2666581 (Job #123047) ** Structured logs now rotate with the correct filename when the log is configured to override a differently named log configured via the 'any' server specifier. #2666580 (Job #123094) * ** *** **** OpenSSL has been upgraded to 3.0.15 #2665940 (Job #123034) ** Setting a trigger command to an empty string will now result in an error on execution rather than allow the undefined behavior. #2665020 (Job #122929) ** Revert 'track' configurable default value back to '-1'. #2664057 (Job #122520) ** Parallel dumps, 'p4d -jdp', did not support filtering for replicas (-P). This has been fixed. #2663219 (Job #122411) ** In rare cases an unshelve performed by Swarm can cause a crash. This has been corrected. #2662475 (Job #120460) ** Tamper checking in commands that update the have list has been improved. #2661232 (Job #122784) ** Corrected crash when authentication fails during istat operation. #2660919 (Job #117647) ** A crash in 'p4 transmit -r' has been corrected. #2660734 (Job #120977) ** Fixed a problem where a user with openstreamspec permission could open a stream spec but not edit the stream spec. Also fixed a problem where a user with writestreamspec permission could not edit and save a new stream spec. #2659944 (Job #122639) ** Unlimited group Timeout setting fixed. #2658234 (Jobs #122162, #122163) * ** Using the 'shelve' command to overwrite a previously shelved stream spec now requires that the user provide the '-f' parameter. Previously the 'shelve' command would overwrite an already shelved stream spec without warning the user, this led to users unintentionally losing those previously shelved changes. #2657745 (Job #121673) ** Uploads to S3 that generate a response code error between 500 and 599 are now retried up to lbr.s3.uploadretries number of times. The default of lbr.s3.uploadretries is 5. #2656176 (Job #122643) ** Promoting shelved changes with the `-p -c` flags also incorrectly shelved any open stream specs prior to the promotion. #2655935 (Job #122569) * ** cURL has been upgraded 8.10.1 #2654300 (Job #122472) ** A rare infinite loop caused by an over-optimisation when scanning the rev table has been fixed. #2652980 (Job #113058) ** Fixed stream spec obliterate problem where a super or admin user could not obliterate the stream spec if configurable 'dm.protects.streamspec' was set to 1. #2652798 (Job #122446) ** Command tamper checking integrity has been improved and now uses SHA256 by default. The 'security.digest' configurable maybe used to choose an alternative hashing algorithm. #2650419 (Job #119098) ** The deletion of the partitioned client now ensures that the numbered partitioned client directory is deleted as well. #2649655 (Job #121134) ** Fixed istat crash with noinherit ParentView when db.bodtextcx rows are missing. #2648564 (Job #122076) ** The command-line client on Windows now prints an error when it detects ambiguous argument encoding. #2648445 (Job #108593) ** A 'p4 submit' on an edge-server can fail with an "Unknown command" error if it is submitting a large number of files with long path-names all together in one changelist. This has been fixed to report a more meaningful error message, "Rpc buffer too big to send!". #2648278 (Job #122088) ** The empty partitioned have directories are no longer created. #2648198 (Job #121666) ** Using S3 for archive files can raise 'file not found' errors when the files are accessed concurrently by multiple clients. This has been fixed. #2648197 (Job #117955) * ** The zlib deflate operation uses x64 instructions not supported on older CPUs raising an illegal instruction exception. This has been fixed. #2645910 (Job #122240) ** When the configurable 'client.sendq.dir' is set, the partitioned have table is now unlocked and removed during the deletion of the respective partitioned client. #2644332 (Job #122058) ** Fixed a memory leak when pull-archive triggers are used to perform archive file transfer. #2644014 (Job #121944) * ** Added net.delta.transfer.minsize and net.delta.transfer.threshold to 'p4 help configurables'. These configurables allow the Helix Core Server and individual clients to enable and disable delta transfer for binary files based on the file size and amount of change between current and prior revisions. #2643135 (Job #121830) ** A recovery operation can fail when the checkpoint file contains multiple partitioned clients. This has been fixed. #2639860 (Job #122043) ** The commands 'p4d -k -jd' and 'p4d -K -jd' now successfully filter the partitioned have tables as expected. #2638204 (Job #119735) ** On Windows, network share access permissions for RCS depot archives can cause a crash. This has been resolved. #2637834 (Job #121380) ** 'p4 reshelve' will now copy shelved stream specs from the source shelf to the destination shelf. The default behavior of reshelve is that it will copy shelved files and stream specs, however this behavior can be controlled by the two new parameters, -Af and -As. If -As is provided then only the shelved stream spec will be copied. If -As is provided then only the shelved files will be copied. #2635787 (Job #121863) ** Fixed a problem where a command following a stream obliteration might give an error the obliterated stream was unknown. The problem only occurred with P4API clients. #2632658 (Job #120711) ** The auto pull operation now updates the 'lastSeenDate' field of the respective 'connect' type topology record across the servers. #2632065 (Job #121790) ** If a virus scanner locks a portion of an RCS temp file during a pull operation, a crash may occur. This has been corrected. #2631147 (Job #120839) ** Failed login delay will now take an exclusive server lock on the client address. #2629083 (Job #119346) ** In case of a commitServer-Edge-ForwardingReplica chain, there was a problem where on ForwardingReplica a 'p4 submit' after Integ/Resolve could fail because archive files were missing on the Edge server. This change fixes the problem by pulling the missing archive-files for the Edge server when needed, allowing 'p4 submit' to succeed. #2628801 (Job #120764) ** Removed unnecessary error "Error object passsed to database already with an error" when attempting to switch a stream workspace with unresolved issues. #2627474 (Job #121555) ** When 'dm.user.hideinvalid' is enabled, non-existent users no longer suppress the autologin prompting. #2627098 (Job #120925) ** Fixed a sparse stream integration problem where an integrate to the sparse stream from the parent was required after an integrate from the sparse stream to parent, even if no changes had occurred in the parent after the first integration. #2626264 (Job #121554) * The file system interface now supports the setting of multiple extended attributes with a single system call on Windows. This improves VFS performance. #2625760 (Job #121621) ** Setting a very low value of db.checkpoint.reqlevel can allow a multifile parallel checkpoint or dump to skip small db.files. This has been fixed. #2623815 (Job #121575) ** The DateTime server type is now defined as a 64 bit signed integer rather than the system defined time_t. This help interoperability with 32bit clients. #2623790 (Job #121563) ** 'p4 user -Dy' will no longer cause replication of an edge server to hang. #2620569 (Job #119795) ** For p4 fetch', if '-I' flag is used the command could fail unexpectedly with a 'Cannot import' error. This change fixes the problem. #2619224 (Job #121237) * ** A new client side configurable 'net.delta.transfer.threshold' has been added to specify the maximum percentage of file size to perform a delta transfer before reverting to streaming the complete file for 'p4 submit' of binary+F files. A value of 0 disables the delta transfer. On a low-bandwidth remote client, a small reduction in file transfer would provide performance gain therefore a higher threshold for the delta transfer would be beneficial; whereas on a client with faster network, a low or zero threshold would avoid the overhead incurred by the delta transfer. #2617863 (Jobs #121296, #121297) ** Fixed a crash in 'p4 fstat -Sr -Or /outside/of/workspace/file'. #2615605 (Job #121279) ** Improved 'p4 submit' performance with delta transfers by removing extraneous resource locking on the p4d server. #2613383 (Job #121119) *** Fix for client 'clobber' option being dropped when syncing through a proxy. #2611770 (Job #121151) ** 'p4 integ' now correctly integrates the files related to the partitioned-jnl type clients. #2611612 (Job #121150) ** 'p4 unshelve' now correctly unshelves the files in the partitioned-jnl client workspaces. #2611471 (Job #121143) ** 'p4 reconcile' now correctly handles the partitioned-jnl client workspaces. #2611120 (Job #120640) ** Using an edge client to populate a stream failed with the error, "file(s) not in client view", when stream components were disabled. #2609870 (Job #121091) ** Fixed reversion of an open stream spec when using the command 'p4 revert -a -Si filelist...'. #2609726 (Job #121059) ** Parallel sync now works correctly from a partitioned client when 'client.sendq.dir' is also set. #2609587 (Job #120982) ** Fixed 'rmt-fileExistsReplica' not exiting properly on commit-server if the calling replica is missing the ExternalAddress field in its server spec. #2609119 (Job #121079) ** Fixed reversion of an open stream spec when using the command 'p4 revert -n -Si filelist...'. #2609107 (Job #120791) ** Fixed stream obliterate endless loop problem. #2607904 (Job #120522) ** To ensure the consistency among the servers, the 'partitioned-jnl' type client cannot be set or created until all upstream servers have been upgraded to at least 2024.1 server version. #2607484 (Job #120840) ** If a Helix Core Server is configured with no logging, a crash may occur. This has been corrected. #2606707 (Job #120873) ** In very rare cases, a CPM, DOS or early Windows text file may use a Ctrl-Z as an EOF marker. Now when such a text file is appended, the EOF is marker is removed before extending the file content. #2604549 (Jobs #120774, #120775, #120913, #120914, #120916, #120918, #120919) ** The partition client have tables now encode the invalid filesystem characters. #2603099 (Jobs #120744, #120824) ** Fixed an error message when unshelving a sparse stream spec which has a lower parent stream changeview than the current stream spec. The previous error message did not make sense in an unshelving context. #2602592 (Job #115232) ** This change introduces a new flag, -E, for p4 copy. The -E flag overrides the current setting for the 'dm.integ.tweaks' configurable and its effect is the same as having 'dm.integ.tweaks' set to 32. This flag, similar to the configurable 'dm.integ.tweaks', is kept undoc. #2602208 (Job #120541) ** 'p4 unload' and 'p4 reload' operations can now be performed on 'readonly' type clients. #2601845 (Job #120592) ** The correct error message is displayed when trying to convert any client type to 'readonly' client type. #2601555 (Job #120765) ** Disabled 'p4 unshelve -S' when the current stream is a sparse stream, since unshelving non-resident files into a sparse stream can lead to undesirable behavior. #2599439 (Job #119766) ** Fixed a problem where switching to a sparse stream at a change would sync parent files at the head revision rather than at the sparse stream changeview change. #2599433 (Job #120642) ** Fixed crash with stream command when server license has expired. #2599132 (Job #120602) ** There is a rare failure situation that was causing p4d to crash. P4d now outputs an error instead in this case: "No was found for this operation." #2599010 (Job #120741) ** Integrating a deleted file into a file that is currently open for branch will no longer report "all revisions integrated". #2597611 (Job #110263) ** This change fixes a performance problem in 'p4 obliterate' where it was causing excessive time on edge-server to purge related db.label records. #2597548 (Job #119772) ** Fixed a journal inconsistency issue on non-Windows platforms caused by killing a running p4 command. #2597197 (Job #108319) ** Fixed a case in which old revisions of a file that had been deleted and re-added multiple times were reported as candidates for integration into a different re-added variant of the file. #2596797 (Job #93116) ** Fixed a case in which a cherry-picked ignore into a moved file caused an earlier changelist to be reported by 'p4 interchanges'. #2595243 (Job #120533) ** Fix for "Invalid changelist number 0" when creating a sparse stream just after an upgrade. #2595242 (Jobs #74403, #79365, #87038, #92184, #103277) ** Integration now includes ancestor branches of the source file when computing the set of outstanding changes. In most cases this distinction doesn't matter because the source file implicitly and recursively inherits changes from ancestor branches, but including the individual revisions of these files in the debit calculation produces better results in complex cases involving backed out changes (e.g. via 'p4 copy' and/or 'p4 undo'). #2594041 (Job #87618) ** Ignored branch records resulting from a cherry-pick now only grant credit for the cherry-picked revisions, rather than implicitly including all prior revisions as is the case for a normal branch record. This fixes a problem in which an ignored branch of a file that was copied from an old revision did not grant any credit at all on subsequent integrations. #2594024 (Job #121240) ** The 'p4 lock' and 'p4 unlock' commands can now be cancelled by using 'p4 monitor terminate' or pressing Ctrl-C on the client. #2591718 (Job #114829) ** For 'p4 fstat' locking db.revcx for long period could block other commands like 'p4 submit' to run simultaneously. This change fixes the problem by altering db.revcx lock mode to PEEK mode, if db.peeking is set to greater than 2. -------------------------------------------------------------------------- Major new functionality in 2024.1 (2024.1/2596294) (2024/05/09) #2565297 (Job #101641, #108660) ** *** Commit servers are now able to verify and fetch missing/corrupted archives from replicas. Running 'p4 verify -t' on commit will add any missing archives to the journal to be replicated to downstream replicas. A background thread is run during journal replay on the replica to check if the file exists and that the digest matches; if it matches, this will notify the upstream commit which will add the archive to 'rdb.lbr' and launch a background pull thread which will end once all the pending records are processed. If the archive does not exist on the replica, then it will add its own journal entry for any further downstream replica server. New f_integrityEvent=12 added to structured logs; this is within the Integrity structured log category. On the replica server, the `f_results` will be one of: * unknown (commit) - if the depotFile/rev could not be found in either db.rev or db.revsh. * open failed (replica) - if the archive could not be opened for any reason. * mismatch (replica) - if the digest does not match. * match (replica) - if the digest matches the digest of the archive requested by the commit. On the commit server, the `f_results` will be one of: * unknown (commit) - same reason as on the replica. * match (commit) - the archive already exists and the digest matches meaning that it could have already been pulled from another replica. * pending (commit) - if multiple replicas notify the commit of having the archive; only the first one will be added to rdb.lbr. * fail (external address) - if no externalAddress is set on replica. * fail (commit) - there was an error while adding to rdb.lbr. * success (commit) - the archive was added to rdb.lbr. #2565074 (Job #116045) ** Introduces a new partitioned client type 'partitioned-jnl' to enable the journaling, recovering, dumping, checkpointing and replicating 'partitioned have tables'. Journaling the partition have table with the client type 'partitioned-jnl': During journaling, the partitioned-jnl have table, 'db.have.pt', is encoded with its respective client name. For example, 'db.have.pt%pclientname' in the journal file. During the partitioned client deletion, the records are deleted from the respective partitioned have table and then the table is dropped for the partitioned client types 'readonly', 'partitioned' and 'partitioned-jnl'. The records deletion and the table drop events are logged in the journal file for the partitioned-jnl client type. For this table drop, a new journal note (31) is introduced. This helps to recover the deleted partitioned-jnl have table later. A new configurable 'db.partition.dropondelete' is introduced. When this is set, the individual records are not deleted but the table is deleted for the client types 'readonly', 'partitioned' and 'partitioned-jnl'. This deletion is followed by the respective new journal note for the client type 'partitioned-jnl'. During the creation of the partitioned have tables, if the partitioned client names have spaces (' ') then these are replaced with underscores ('_h). Dumping the partitioned have table: Enables the dumping of the partitioned have tables using 'p4d -jd' command for the client types 'readonly', 'partitioned' and 'partitioned-jnl'. For dumping a single table, the partitioned have table must be appended with the respective partitioned client '%pClientName'. For example, 'p4d -jd - db.have.pt%pclient'. Otherwise, it would result in an error. When dumping all the tables, the partitioned have tables with the client types 'partitioned' and 'readonly' are not dumped to ensure that these are not recovered during the replay operation. The parallel options for dumping partitioned have tables are supported, 'p4d -jdp' and 'p4d -jdpm'. Checkpointing the partitioned have table with the client type 'partitioned-jnl': Enables checkpointing the partitioned-jnl have tables using the commands 'p4 admin checkpoint' and 'p4d -jc'. The parallel options for checkpointing partitioned-jnl have tables are supported, 'p4d -jcp' and 'p4d -jcpm'. Recovering the partitioned have table with the client type 'partitioned-jnl': Enables replaying the partitioned-jnl have tables using the command 'p4d -jr'. The overriding mechanism of the configurable 'client.readonly.dir' during the journal replay is as follows: If the configurable 'client.readonly.dir' is empty on the server on which this replay is run, then, by default, this configurable will be set with the value captured from the journal. A new extended flag '-o' has been introduced for this operation with the usage syntax as 'p4d -jro'. If the configurable 'client.readonly.dir' is already set and there is a new value in the journal then it will be overridden with this new value if the journal restoration is run with '-jro' option. Otherwise, the configurable is not overridden with the new value. The overriding mechanism of the configurable 'client.readonly.dir' during the checkpoint replay is as follows: If 'p4d -jr' is run in a non-empty directory, the configurable 'client.readonly.dir' maintains the already existing value if one exists. If 'p4d -jr' is run in an empty directory, the configurable 'client.readonly.dir' is set. If 'p4d -jrF' is run in a non-empty directory, the existing 'client.readonly.dir' configurable is overridden. 'p4d -jro' has no significance in the checkpoint replay. It is applicable only for the journal replay. The parallel option for the replay of partitioned-jnl have tables is supported, 'p4d -jrp'. The 'p4d -h' command outputs this new journal restoration option '-jro'. Enhancing the P4 client and server commands to process the partitioned have tables: The partitioned have tables are processed by the P4 client and server commands. A few have been addressed here: 'p4 dbstat': The 'p4 dbstat' command processes the partitioned have tables. 'p4 journaldbchecksums': The command 'p4 journaldbchecksums' processes the partitioned have tables with the client type 'partitioned-jnl' and ignores the 'reaonly' and 'partitioned' client types. The journal note checksums that are replicated, are processed on the replica servers for the partitioned-jnl have tables integrity check. 'p4 journaldbchecksums -t' and 'p4 journaldbchecksums -T' commands with a specific partitioned have table results in a usage error. 'p4 journaldbchecksums -u' ignores the partitioned have tables. 'p4 unload' and 'p4 reload': The partitioned clients of type 'partitioned' and 'partitioned-jnl' can be unloaded and reloaded. Especially during the unload operation, instead of deleting the individual records from the respective db.have.pt table, the table by itself is deleted. The table drop journal note is also added in the journal for the client type 'partitioned-jnl'. 'p4 changes -m @pclient': The command 'p4 changes -m @pclient' outputs the addressed maximum latest submitted changes for the revisions of the files that are on the specified partitioned client's have list. 'p4 dbverify' and 'p4d -xv': The partitioned have tables are validated or verified using the 'p4d -xv' and 'p4 dbverify' commands. A new configurable, 'db.partition.verify', is introduced. By default, this is set. If the partitioned clients do not exist, then the partitioned have tables are not validated or verified. 'p4d -xx': Enables the table pair integrity check for the tables 'db.working' and 'db.have.pt'. The table 'db.have.pt' represents all the available partitioned have tables (db.have.pt%pclient). In this operation, the presence of the related entries with respect to the partitioned have clients from the db.working table is checked in the respective db.have.pt tables. If not found, then the delete instruction related to the entry in db.working is placed in the jnl.fix file. The non-partitioned client entries from the db.working table are ignored. 'p4d -xvU': The command 'p4d -xvU' performs the table-not-unlocked database check for the partitioned have tables. For the details, please read the server documentation. #2573125 (Job #119059) * ** Commits to files of type 'binary+F' now use a delta transfer mechanism to only send the modified portion of file content from the client to the server. This is primarily an optimization for low-bandwidth remote users, but also helps reduce server-side CPU usage generally. The new 'net.delta.transfer.minsize' configurable can be set to zero on the server to disable delta transfers globally. When set to zero on the client, it disables it locally. Other values on the client represent the minimum file size that a delta transfer will be performed on. Limitations: - Delta transfer of commits through an edge-server is only available via background submits ('p4 submit -b'). - Delta transfers are not available in parallel submit. - Proxy cache-on-submit does not cache delta transfer content. #2549738 (Job #117985) ** The Sparse Stream feature adds 2 new types of streams, sparsedev and sparserel streams. A client of a sparse stream has view mappings for both the parent and child stream depot paths, overlaid into a single client path. The parent depot paths are fixed to a specific change number; that change number is automatically updated during integrations into the sparse child. When a sparse stream is first created, parent files within a share path are not branched, and the sparse stream contains no depot files. The first time a file within a sparse share path is opened for edit, the file is immediately branched into the sparse stream. Sparse streams are truly sparse, since branching only occurs when a file needs to be changed and the bulk of files that are visible in a sparse stream reside solely in the parent's depot path. Sparse streams are intended to be used with a small number of branched files. To that end, a configurable has been added to limit the number branched files: dm.stream.sparse.branchmax (default 100k, 0 removes limit). Once the number of branched files reaches the branch max limit, a sparse stream may be converted to a development or release stream equivalent with the stream sub-command 'p4 stream convertsparse'. Sparse streams have a number of restrictions: - No reparenting; sparse stream parents are fixed. - No partial integrations: only full stream integrations are allowed, and the only revision limit allowed is @<=change. - Each stream must have at least one share path. - No unshelving from a different stream. - No undo. - No editing of pin after any files are populated or added into the sparse stream; the pin may be updated only through integration. - ParentViews are always 'inherit'. - Sparse streams cannot be consumed as components of other streams. - Sparse streams cannot have non-virtual stream children. - Sparse streams can have virtual stream children, but virtual children of sparse streams cannot have children and cannot be integration targets. - Non-sparse streams cannot be converted to sparse streams. Minor new functionality in 2024.1 (2024.1/2596294) (2024/05/09) #2591319 (Job #118242) ** All depots types except "remote" can now be backed by S3. #2587740 (Job #120109) ** *** **** The mimalloc memory allocator library has been upgraded to 2.1.2. #2584762 (Job #119816) ** New configurable 'dm.user.hideinvalid' can be set to 1 to hide user specific errors when running 'p4 login' and 'p4 passwd' with an invalid user. With it enabled, 'p4 login' and 'p4 password' will follow the normal authentication process even if the user does not exist and will output an invalid password error or an authentication failure error for ldap. This does not affect 'p4 users' which can still reveal valid users, see 'run.users.authorize' configurable for more information. #2584270 (Job #120133) ** All structured log events at version 58 now record the formatted date (column 3: f_date) in ISO8601 format. The 'serverlog.version.N' configurable can be used to pin a structured log file to a specific server version's format. To retain the prior structured log events format, set the 'serverlog.version.N' configurable to 57. #2580017 (Job #105450) ** This change helps customers with a reminder when they need to do journal rotations. At login if the last journal rotation is older than a set threshold days a warning will be displayed for admins and users of type operator. The threshold is set through a configurable: db.journalrotate.warnthresh. By default this threshold is unset ( it is 0 ) which means no warning will be displayed. Its maximum is 365 days. #2566505 (Job #110500) ** This change introduces a new option, -Fd, for 'p4 client' that when used along with the -fd option it will delete the client together with all its shelved files. #2564827 (Job #119620) ** 'p4 labelsync' and 'p4 tag' now apply the label to all file arguments sequentially, such that if multiple arguments reference the same depot file at different revisions, the last argument to reference a given file is used to determine which revision is stored in the label. #2558783 (Job #119168) ** With this change it is now possible to reset password with 'p4 resetpassword' when auth.sso.allow.passwd is set to 1 and user has AuthMode set to 'perforce'. Previously this was failing with error "Cannot reset password with external authentication". #2554775 (Job #117979, #118152) ** 'p4 configure help' now includes '...Option0' to '...Option[N-1]' fields for accepted/possible values for string type configurables. #2552035 (Job #119111) ** When resolving a filename change with a different depot file synced to the workspace location that the open file needs to move to, the existing file is now automatically unsynced in order to allow the move to proceed. Note that if the resolved file is then reverted, the original file is not automatically resynced. #2551155 (Job #077851) ** The 'p4 client', 'p4 branch', and 'p4 label' specs now support comments in the 'View' section by using ##. You can append a ## comment to a valid line in the 'View' section. You also can make an entire line be a comment by putting ## at the beginning of the line. #2546660 (Job #118151) ** 'p4 configure show' now includes the last modified DateTime for a given configurable. #2543652 (Job #077851) ** The 'p4 typemap' spec now supports comments in the 'Typemap' section by using ##. You can append a ## comment to a valid typemap line. You can also make an entire line be a comment by putting ## at the beginning of the line. #2539120 (Job #118569) ** Improved the performance of branching a file when the workspace already has the source file revision. #2538502 (Job #118546) ** Improved the performance of 'p4 renameuser'. #2533131 (Job #117980) ** Added a configurable to force a mandatory comment when setting a configurable. Set 'dm.configure.comment.mandatory=1' to enable which will cause 'p4 configure set' to fail if no comment is provided. See 'p4 help configure' for more information on setting comments. #2528847 (Job #117798) ** Removed default values from 'p4 help configurables'; use 'p4 configure help' instead. #2527758 (Job #117507) ** The previous comment is now outputted when overwriting configurable history with 'p4 configure history'. #2525336 (Job #108001, #117238) ** When running 'p4 integrate', 'p4 copy', and 'p4 merge' within a stream client to integrate changes from another stream into the current stream, a stream view is now required, in order to prevent users from accidentally circumventing integration policies defined on a stream by using a manually generated branch view to perform integrations. Integrations that use manual views but that do not appear to be an attempt to integrate from one stream to another (e.g. where the source is a classic depot) are still permitted. When a stream-to-stream manual integration is detected, an error is now produced along with a suggested alternate command that will use the stream view; in many cases the suggested command may produce the same result that the original command would have. Users and client applications wishing to avoid this error should do one of the following: 1. Use a stream view as suggested by the error message. This is the preferred solution since it is the only way to prevent errors that may be caused by manually defined views. 2. Set the "api" protocol variable to 95 or lower. For compatibility purposes, this check is not performed for older client applications, as determined by the "api" variable. Note that client applications built with API libraries before 2024.1 will have a corresponding "api" value set by default. Scripts that call the p4 CLI directly and wish to minimize command output changes should always use "-Zapi=N" to set a specific API compatibility version. 3. Use the "-F" flag (which is now accepted by "p4 integrate" for this specific purpose) to override this check. #2525181 (Job #118186) ** The ComputeEnd structured log event (1.58) now includes: * the command lapse time (f_lapse) * peak memory for the command so far (f_peakMemCommand) * peak memory for the process so far (f_peakMemProcess) * the command paused time (f_paused) These fields are appended from column 16 (after the command group field). The 'serverlog.version.N' configurable can be used to pin a structured log file to a specific server version's format. To retain the prior structured log events format, set the 'serverlog.version.N' configurable to 57. #2525176 (Job #99193, #118292) * P4 can now create symlinks on Windows 10 and above, when developer mode is enabled, without needing to run in administrator mode. #2524637 (Job #108006) ** This change introduces a new -a flag for 'p4 depots' command. With -a flag hidden depots will be included in the output. This is specially useful when user needs to check map paths for all depots. Bugs fixed in 2024.1 Patch 3 (2024.1/2661979) (2024/10/04) #2661232 (Job #122784) ** Corrected crash when authentication fails during istat operation. #2661134 (Job #117647) ** A crash in 'p4 transmit -r' has been corrected. #2659944 (Job #122639) ** Unlimited group Timeout setting fixed. Bugs fixed in 2024.1 Patch 2 (2024.1/2655224) (2024/09/18) #2654300 (Job #122472) ** A rare infinite loop caused by an over-optimisation when scanning the rev table has been fixed. #2651891 (Job #122076) ** The command-line client on Windows now prints an error when it detects ambiguous argument encoding. #2651627 (Job #121134) ** Fixed istat crash with noinherit ParentView when db.bodtextcx rows are missing. #2649935 (Job #121666) ** Using S3 for archive files can raise 'file not found' errors when the files are accessed concurrently by multiple clients. This has been fixed. #2648900 (Job #122240) ** When the configurable 'client.sendq.dir' is set, the partitioned have table is now unlocked and removed during the deletion of the respective partitioned client. #2648897 (Job #117955) * ** The zlib deflate operation uses x64 instructions not supported on older CPUs raising an illegal instruction exception. This has been fixed. #2644014 (Job #121944) * ** Added net.delta.transfer.minsize and net.delta.transfer.threshold to 'p4 help configurables'. These configurables allow the Helix Core Server and individual clients to enable and disable delta transfer for binary files based on the file size and amount of change between current and prior revisions. #2643135 (Job #121830) ** A recovery operating can fail when the checkpoint file contains multiple partitioned clients. This has been fixed. #2641044 (Job #122043) ** The commands 'p4d -k -jd' and 'p4d -K -jd' now successfully filter the partitioned have tables as expected. #2640008 (Job #120982) ** Fixed 'rmt-fileExistsReplica' not exiting properly on commit-server if the calling replica is missing the ExternalAddress field in its server spec. #2639260 (Job #122045) ** Linux Arm64 (aarch64) build was recompiled with GCC 8 to resolve a backward compatibility issue. #2638504 (Job #120640) ** Using an edge client to populate a stream failed with the error, "file(s) not in client view", when stream components were disabled. #2638401 (Job #119346) ** In case of a commitServer-Edge-ForwardingReplica chain, there was a problem where on ForwardingReplica a 'p4 submit' after Integ/Resolve could fail because archive files were missing on the Edge server. This change fixes the problem by pulling the missing archive-files for the Edge server when needed, allowing 'p4 submit' to succeed. #2635787 (Job #121863) ** Fixed a problem where a command following a stream obliteration might give an error the obliterated stream was unknown. The problem only occurred with P4API clients. #2634780 (Job #120711) ** The auto pull operation now updates the 'lastSeenDate' field of the respective 'connect' type topology record across the servers. #2634274 (Job #121790) ** If a virus scanner locks a portion of an RCS temp file during a pull operation, a crash may occur. This has been corrected. #2633881 (Job #114829) ** For 'p4 fstat' locking db.revcx for long period could block other commands like 'p4 submit' to run simultaneously. This change fixes the problem by altering db.revcx lock mode to PEEK mode, if db.peeking is set to greater than 2. #2633324 (Job #115232) ** This change introduces a new flag, -E, for p4 copy. The -E flag overrides the current setting for the 'dm.integ.tweaks' configurable and its effect is the same as having 'dm.integ.tweaks' set to 32. This flag, similar to the configurable 'dm.integ.tweaks', is kept undoc. #2633218 (Job# 118689) The p4dctl package will configure a systemd service on hosts running systemd in order to start and stop the p4dctl-managed server instances. Use the systemctl command to manage the service named "helix-p4dctl". #2629813 (Job #119795) ** For p4 fetch', if '-I' flag is used the command could fail unexpectedly with a 'Cannot import' error. This change fixes the problem. #2629303 (Job #121575) ** The DateTime server type is now defined as a 64 bit signed integer rather than the system defined time_t. This help interoperability with 32bit clients. #2628645 (Job #121621) ** Setting a very low value of db.checkpoint.reqlevel can allow a multifile parallel checkpoint or dump to skip small db.files. This has been fixed. #2627572 (Job #119476, #119575) ** The command 'p4 journaldbchecksums -u unloadfile -t dbtable' now unload the files successfully for the partitioned-jnl have tables. #2627617 (Job #120925) ** Fixed a sparse stream integration problem where an integrate to the sparse stream from the parent was required after an integrate from the sparse stream to parent, even if no changes had occurred in the parent after the first integration. #2626263 (Job #121119) *** Fix for client 'clobber' option being dropped when syncing through a proxy. Bugs fixed in 2024.1 Patch 1 (2024.1/2625008) (2024/07/15) #2621152 (Job #119512) ** 'p4d -xx' command can now be used to check the integrity between the tables 'db.working' and 'db.have.pt%pclient', where the later represents a specific partitioned have table. #2619520 (Job #119772) ** Fixed a journal inconsistency issue on non-Windows platforms caused by killing a running p4 command. #2619517 (Job #121240) ** The 'p4 lock' and 'p4 unlock' commands can now be cancelled by using 'p4 monitor terminate' or pressing Ctrl-C on the client. #2619224 (Job #121237) * ** A new client side configurable 'net.delta.transfer.threshold' has been added to specify the maximum percentage of file size to perform a delta transfer before reverting to streaming the complete file for 'p4 submit' of binary+F files. A value of 0 disables the delta transfer. On a low-bandwidth remote client, a small reduction in file transfer would provide performance gain therefore a higher threshold for the delta transfer would be beneficial; whereas on a client with faster network, a low or zero threshold would avoid the overhead incurred by the delta transfer. #2617863 (Job #121296, #121297) ** Fixed a crash in 'p4 fstat -Sr -Or /outside/of/workspace/file'. #2617328 (Job #120791) ** Fixed stream obliterate endless loop problem. #2617321 (Job #87618) ** Ignored branch records resulting from a cherry-pick now only grant credit for the cherry-picked revisions, rather than implicitly including all prior revisions as is the case for a normal branch record. This fixes a problem in which an ignored branch of a file that was copied from an old revision did not grant any credit at all on subsequent integrations. #2617061 (Job #121091) ** Fixed reversion of an open stream spec when using the command 'p4 revert -a -Si filelist...'. #2615784 (Job #119311, #119719 ) ** The commands 'p4 attribute' and 'p4 fstat -Oa' could fail with 'Rpc buffer too big' errors if an attribute value size was too large (greater than 250MB). Now the command 'p4 attribute -I' which reads the attribute value from a file may be used for attribute values that would generate that error. In addition, the 'p4 print -T' command may now be used to print an attribute value that would generate that error from the 'p4 fstat -Oa' command. #2615605 (Job #121279) ** Improved 'p4 submit' performance with delta transfers by removing extraneous resource locking on the p4d server. #2612813 (Job #121079) ** Fixed reversion of an open stream spec when using the command 'p4 revert -n -Si filelist...'. #2611770 (Job #121151) ** 'p4 integ' now correctly integrates the files related to the partitioned-jnl type clients. #2611612 (Job #121150) ** 'p4 unshelve' now correctly unshelves the files in the partitioned-jnl client workspaces. #2611471 (Job #121143) ** 'p4 reconcile' now correctly handles the partitioned-jnl client workspaces. #2609726 (Job #121059) ** Parallel sync now works correctly from a partitioned client when 'client.sendq.dir' is also set. #2607924 (Job #120522) ** To ensure the consistency among the servers, the 'partitioned-jnl' type client cannot be set or created until all upstream servers have been upgraded to at least 2024.1 server version. #2607673 (Job #110263) ** This change fixes a performance problem in 'p4 obliterate' where it was causing excessive time on edge-server to purge related db.label records. #2607484 (Job #120840) ** If a Helix Core Server is configured with no logging, a crash may occur. This has been corrected. #2606485 (Job #120824) ** Fixed an error message when unshelving a sparse stream spec which has a lower parent stream changeview than the current stream spec. The previous error message did not make sense in an unshelving context. #2604549 (Job #120774) ** The partition client have tables now encode the invalid filesystem characters. #2604055 (Job #120765) ** Disabled 'p4 unshelve -S' when the current stream is a sparse stream, since unshelving non-resident files into a sparse stream can lead to undesirable behavior. #2602241 (Job #120541) ** 'p4 unload' and 'p4 reload' operations can now be performed on 'readonly' type clients. #2601945 (Job #120592) ** The correct error message is displayed when trying to convert any client type to 'readonly' client type. #2599439 (Job #119766) ** Fixed a problem where switching to a sparse stream at a change would sync parent files at the head revision rather than at the sparse stream changeview change. #2599433 (Job #120642) ** Fixed crash with stream command when server license has expired. #2599428 (Job #120533) ** Fix for "Invalid changelist number 0" when creating a sparse stream just after an upgrade. #2598134 (Job #119825) ** 'p4 integrate' now treats pending 'copy' records from the source file as direct credit when determining the initial debit. Bugs fixed in 2024.1 (2024.1/2596294) (2024/05/09) #2587967 (Job #119856) ** Made error messaging more consistent for integration commands with StreamAtChange clients. #2593175 (Job #119797) ** S3 uploads over 4GB now use multipart uploads to overcome the 5GB limit on a single upload. #2591978 (Job #120194) ** Changed error message when unshelving a stream spec in a StreamAtChange client to say that the spec cannot be unshelved in a StreamAtChange client. #2591970 (Job #120563) ** 'p4 submit -e' run against a 'lbr.replication=shared' edge server no fails to calculate checksums/filesizes for files of type +k that where previously deduplicated on the shelf. #2591970 (Job #120536) ** The paths used for files within an S3 bucket are now relative to the depot path and are no longer affected by absolute depot mappings nor 'server.depot.root'. #2590936 (Job #120474) ** Replication of a journal rotation event from an upstream server using journalcopy can no longer enter a loop. #2589959 (Job #120343) ** S3 now correctly handles files with tildes (~) in their paths. #2588539 (Job #110981) ** With 'p4 sync -L' when fileSpec arguments include #0 revision, the command could miss syncing some of the files. This change fixes the problem. #2585389 (Job #120187, #120193) ** Changed error message when opening a stream spec in a StreamAtChange client to say that the spec cannot be opened in a StreamAtChange client. #2580908 (Job #120021) ** Fixed 'p4 add ...' when it is run in a workspace whose client map does not contain a wildcard mapping (%, *, or ...) against multiple new files. Previously, the command only opened one file to be added. #2587752 (Job #115877) ** On an edge-server 'p4 submit' following a 'p4 integ -v' could fail with "No such file or directory". This change fixes the problem. #2587687 (Job #111184) ** This change fixes a problem in 'p4 submit' on edge-server where after reshelving a delete revision 'p4 submit' could fail with: "Can't map to archive!". #2587164 (Job #118519, #118583, #118622) ** Fix configurable validation routine where large integer values are possible, including 'auth.ldap.timeout' and 'auth.ldap.pagesize', and clarify some default configurable settings. #2579882 (Job #119854) ** *** Client stats are no longer collected when a proxy server prior to this patch is used, preventing a potential hang when multiple commands are run on the same connection. #2578431 (Job #119853) ** Fixed a performance degradation introduced in the 2023.1 release in the 'p4 fstat' command with a large client map. The command performance has been restored to the previous release levels. #2576718 (Job #119914) ** 'p4 dbpack' now reorders the database index pages for the partitioned have tables as well. #2573910 (Job #119810) ** The error message, "db.group locked after db.stream", no longer appears when submitting a stream spec on an edge server and then issuing a stream command. Previously, this error could occur in P4V or any client that uses a shared connection. #2573319 (Job #118904) ** A new -Om option was added to the 'p4 fstat' command to output ditto mapped files when the client file syntax is used. #2572153 (Job #119521) ** If 'p4 switch' cannot fully reconcile all files in the user's workspace the switch will now fail with an appropriate error. #2568009 (Job #119493) ** Fixed stream view generation at a specific change causing an endless loop during upgrade, where the loop occurs for the stream's ancestors and the stream itself is not in the loop. #2566644 (Job #119638) ** Ensure all interfaces are listed in tagged output for 'p4 license -L'. #2563515 (Job #119203) ** A non-parallel checkpoint request using more than one thread did not ensure that the CHECKPOINT_HEADER note appeared as the first line in the output file. Also the same checkpoint on a Windows platform did not use the correct line ending. This has been fixed. #2563050 (Job #119453) ** Fixed "db.streamview locked after db.domain" error when submitting an opened stream spec. #2561836 (Job #118023) ** Attempting to unsubmit a change that affected a stream specification is now blocked. Unsubmit has never supported undoing changes to stream specifications and would previously unsubmit the files in a change while leaving the stream specification still submitted. #2561877 (Job #118997) ** 'dm.protects.exclusioncheck' no longer blocks the owner of sub-protection table from modifying it. #2559739 (Job #112564) ** Added 'dm.protects.exclusioncheck' check to 'p4 servers', 'p4 remotes', 'p4 switch', and 'p4 print'. #2557637 (Job #119417) ** Fixed a crash when 'p4 unshelve -b/-S' encountered an error. #2556267 (Job #119435) ** A deleted stream may now be re-created with a different ParentView. #2554783 (Job #109776) * ** *** **** The SSL certificate validation no longer assumes that P4PORT will be set to a FQDN. #2551531 (Job #118961) ** 'p4 diskspace' now correctly handles symlinks. Additionally, the output now also includes the mount point for each location used by the server. The formatted output can be reverted to the prior format by setting the 'api' level to 95 or lower; for example 'p4 -Zapi=95 diskspace'. #2550748 (Job #119133, #119153) ** The performance of 'p4 streams --viewmatch //...' and similar wildcarded paths has been improved by changing the output to include all lines in the stream whose depot mappings intersect with the wildcarded path, rather than identifying the specific line that is used to map a given file in the stream. Specific matching lines are still returned when a single file is used as the --viewmatch argument. #2546650 (Job #118998) * ** *** **** Improve SSL error detection and handling to prevent reporting non-existent SSL errors. Previously this was theoretically possible but had not been observed. #2546586 (Job #118566) ** Parallel recoveries did not detect a character set mismatch between the server and recovery files. This has been fixed. #2545744 (Job #113441) ** The 'p4 sync' command with multiple user specified file patterns will now batch compute all sync arguments and collate file actions before sending files to the client. #2544325 (Jobs #118375, #112333) ** On Windows the atomic rename api is limited in scope by the OS. With this change the atomic rename is first attempted, if the atomic rename fails the operation falls back to a copy truncate. #2543769 (Job #116539) ** It was possible for the table dump command 'p4d -jd' to create the MD5 checksum file even when the command had failed. This has been fixed. #2542406 (Job #107457) * ** *** **** Improve SSL connection establishment under heavy load. In particular this eliminates the "wrong version number" error when the client is slow to initiate the SSL handshake after establishing the TCP connection. #2540339 (Job #118002) ** 'p4 obliterate' can no longer write archive delete journal notes when a journal rotation is in progress. #2539409 (Job #118756) ** Attempts to assign a negative value to a date field are now blocked. #2539408 (Job #118549) ** The server does not handle date fields containing negative values correctly. This has been fixed. #2536499 (Job #118593) ** Adding an Extension that implements a 'pressure-pause' event no longer prevents updates to triggers. #2536202 (Job #118635) ** The range of dates that can be represented and queried in Date job fields has been increased from the year 2038 to the year 2286. #2534366 (Job #118342) ** The monitor level stored by 'rt.monitorfile' is no longer reset to 0 when each new command starts. #2534366 (Job #116191) ** Fixed DVCS fetch, push and zip commands incorrectly reporting a split move across changelists. #2534072 (Job #118559) * ** *** **** Clients now call shutdown() before closing a network connection in order to process all pending packets and ensure a clean connection shutdown. In particular, pending packets will not be lost when a client is terminated via control-c (^C). #2531031 (Job #658) ** 'p4 resolved //depot/file' will now return matches for the 'yours' file as well as the 'theirs' file. #2531128 (Job #118495) ** Extensions installed on a Windows commit server and run on a Unix replica will now work. #2530847 (Job #516) ** 'p4 add' of a file opened for branch with 'p4 integ -v' will no longer attempt to make the workspace file writable, since there is no depot file present in the workspace in that scenario. #2530479 (Job #118395) ** Set digest/filesize on text+k files for 'p4 change -t' command. #2530372 (Job #118360) ** Replacing a trait value that had been saved in the trait depot with a value that is saved in db.traits would cause the trait depot depotfile to not be removed. This has been fixed. #2530369 (Job #433) ** The "//xxx/... - must refer to client 'yyy'" error message now includes the phrase "or a depot", since in the context in which this error appears it is valid for "xxx" to be either the current client or any accessible depot. #2529691 (Job #118150) ** Fixed 'p4 configure show allservers' output inconsistency. Output now includes the self-doc fields from 'p4 configure help'. #2529474 (Job #118397) ** The command 'p4 configure help' for a particular configurable now results in a command usage error. #2527918 (Job #114849) ** The fix for job #84375 inadvertently caused issues for the 'SearchBindPasswd' field of the 'p4 ldap' specification, resulting in authentication failures when using that LDAP connection; this has been fixed #2527606 (Job #112369) ** The 'p4 fstat' command with multiple user specified filespecs will now batch compute all command arguments before displaying information about each file to the client. When run against an edge server with the global lock option -OL, this has the effect of improved performance due to reduced rmt-GlobalLockFetch calls. #2527036 (Job #114420) ** 'p4 renameuser' no longer takes long write locks on db.monitor. #2526915 (Job #115632) ** Fixed auto-shelve of modified content on distribution server when switching between streams. #2526838 (Job #116689) ** Replicas configured with 'lbr.replication=cache' will now check for a running archive pull thread before triggering deferred archive replication for files being sync'ed. #2522789 (Job #115864) ** The client filesize cache data is now replicated. If filesize data needs to be generated on a replica, the required archives are pulled on-demand if not already replicated. #2522653 (Job #118004) ** On-demand fetching of archives from a replica will now cause the commit server to perform a fetch on-demand if the archive has not yet been transferred from an edge server as part of a background submit. The client requesting the file content will no longer receive a librarian error in this situation. #2522208 (Job #118198) ** 'p4 license -L' no longer reports the MAC addresses of network interfaces that do not have IPv4 or IPv6 addresses. #2519364 (Job #102151) ** This change improves performance for 'p4 sync' for cases where client view is complex and has many entries. #2519175 (Job #122751) ** 'p4 interchanges -S' now consistently reports changes that require integration, as it is documented to. Previously, it would sometimes partially mimic the behavior of 'p4 copy' and report changelists associated with arbitrary revisions of differing files rather than changelists associated with unintegrated revisions, with additional special-casing to eliminate some of the most obviously nonsensical results. In the interests of simplicity and performance, the behavior is now consistent with 'p4 integrate'. #2518835 (Job #118062) ** Files that are known to the server to be modified in a workspace, i.e. open files, are now considered "modified" for the purposes of 'p4 obliterate -b' and 'p4 prune'. #2516156 (Job #117862) ** The --from flag now works correctly when integrating into a mainline stream from one of its children. #2515370 (Job #112901) ** If a file was added with the same name as a file which had previously been moved, then a 'p4 verify' might erroneously report the readded file was missing. This has been fixed. #2511533 (Job #117953) ** 'p4 diff' now produces more consistent results with a diff against the default (#have) revision when diffing against the same revision by explicitly providing it as a command argument. #2509774 (Job #117916) ** Now 'p4d -xx db.working db.have' table pair integrity check does not result in partitioned client files deletion entries in jnl.fix file. #2506947 (Job #116293) ** 'p4 search' could get stuck when putting a read-lock on the ixtext table. This change fixes the problem by switching to lockless access for the table. #2506405 (Job #114542) * A 'p4' request now reports invalid character encodings passed in the program aruments. #2504413 (Job #117741) * ** cURL (for extensions) has been upgraded 8.4.0 to address multiple cURL CVEs: CVE-2023-38545 and CVE-2023-38546 #2502624 (Job #113605) ** When 'p4 verify -S @=' is run with a change# that is not shelved, or was shelved previously and then the shelf was deleted, 'p4 verify' for this case would incorrectly output files from other shelved changes. This change fixes the problem. #2501687 (Job #117719) * ** *** **** Ignore spurious SSL errors detected during SSL client and server initialization to prevent reporting non-existent SSL errors. Previously this was theoretically possible but had not been observed. #2498308 (Job #91847) ** 'p4 sync' could fail to schedule a resolve against newer revisions of a file that had been opened for move if the move/add revision had a higher revision number than the corresponding move/delete. #2492795 (Job #117470) * ** *** **** Make SSL error handling more robust and provide more detailed and user-friendly SSL error messages. -------------------------------------------------------------------------- Major new functionality in 2023.2 (2023.2/2519561) (2023/11/14) #2489411 (Job #116768) ** Initial support S3 backed depots This is initially limited to depots of type archive, but will be extended to support other depot types in the future. #2486446 (Job #115674) ** New attribute values may now be optionally stored in a traits depot rather than in the db.traits table when the size of the value meets or exceeds a configured size (in bytes) as set by the new configurable 'trait.storagedepot.min'. The 'p4 fstat -Oa' option will fetch and display the value from its storage location, which will be either the trait depot or the db.traits table. A new command, 'p4 fstat -On' will display the attribute names with their storage locations rather than their trait values. The 'p4 attribute' command now has options to override the configurable under certain circumstances. Please see 'p4 help attribute' and 'p4 help fstat' for further details. Minor new functionality in 2023.2 (2023.2/2519561) (2023/11/14) #2499053 (Job #112875, #117469) ** Validate IP/MAC address or FQDN against valid addresses on the server host before applying a new license with 'p4 license -i'. No server server restart is needed for any license update. #2495109 (Job #97048) *** Added a new p4p option, --cache-purge, for clearing proxy cache files that have not been accessed recently. The threshold for access time is set by the new configurable 'proxy.clearcachethresh'. #2491355 (Job #116606) ** Added a new comment field to config history records: long option --comment can be used to set the comment for the last history record for a given configurable, or used with set/unset. See 'p4 help configure' for usage details. #2487108 (Job #117327, #113690) ** The new journalPrefixBackup Commit Server configurable makes it possible to manually move rotated journal files to a secondary storage location and still support edge server activity. See the Command Reference for details. #2486366 (Job #116822) ** New command 'p4 configure help' outputs all documented configurables. Shows their value, description, value type, min value (if available), max value (if available), default value, recommended value (if available), restart requirements, support level, category and URL of the online help. #2485308 (Job #110741) ** The performance of 'p4 reload' has been improved by optimising its memory usage. #2483722 (Job #112874) ** Use 'p4 license -L' to obtain a list of valid IP or MAC addresses from your server host. #2483011 (Job #095924) * ** *** Log the number of files sent/received by the server/proxy/client and size in bytes for more visibility. Unstructured logs will show separate logs for server/client/proxy as '--- filetotals (svr) send/recv files+bytes 0+0mb/0+0mb' '--- filetotals (client) send/recv files+bytes 0+0mb/0+0mb' '--- filetotals (cache) send/recv files+bytes 0+0mb/0+0mb' The following changes have been made for structured logs: 1. The existing DMG_LOG_TRACK_RPC event now has 4 new fields: f_sendDirectFiles f_recvDirectFiles f_sendDirectBytes f_recvDirectBytes 2. New event DMG_LOG_CLIENT_STATS (event number 25) with 4 fields: f_sendClientFiles f_recvClientFiles f_sendClientBytes f_recvClientBytes 3. New event DMG_LOG_PROXY_STATS (event number 26) with 4 fields: f_sendCacheFiles f_recvCacheFiles f_sendCacheBytes f_recvCacheBytes CURRENT LIMITATIONS: 1. Only proxies will forward the client stats to the commit server, and any cached delivers, file total logging disabled on broker, and forwarding-replica will log locally instead of forwarding the stats to the upstream commit server. 2. Neither forwarding replica or proxy will log filetotals cached during transfer, from either commit->proxy/replica or from client->proxy/replica. #2482034 (Job #117182) ** 'p4 streams --viewmatch' now accepts a revision specifier. #2470778 (Job #116585) * ** *** **** P4PORT transport prefixes (e.g., 'tcp', 'tcp4', 'tcp46, 'tcp6', 'tcp64', and their SSL equivalents) are no longer required to be lowercase. The alphabetic characters in a transport prefix may be uppercase, lowercase, or mixed case. #2442141 (Job #053773, #034662) * ** The 'zlib.compression.level' configurable has been added to allow for specifying the amount of compression attempted for various activities. The configurable has a range from -1 to 9, with 9 being the slowest and highest compression level. The -1 setting corresponds to the default setting of the zlib library, which is currently level 6. This allows admins to trade compression time for file size. The difference in file size can be smaller than the gains had by spending less time compressing files, so allowing for this choice offers a useful setting to expose since spending less time waiting for 'p4 submit' is cheaper than using a bit more storage. E.g. a 'p4 submit' of a binary file with the default compression level of 6 takes 4.75s and results in a 49MB archive file. Changing the level to 2 takes 2.98s and results in a 54MB archive file - that's a 37% faster commit and 10% bigger binary, and ~54% faster than the 22.2 release. The setting is primarily applied server-side, intended for archive file activities, but can also be used client-side, e.g. for the client spec 'compress' option. Bugs fixed in 2023.2 Patch 7 (2023.2/2690760) (2024/12/04) #2686057 (Job #122076) ** The command-line client on Windows now prints an error when it detects ambiguous argument encoding. #2685395 (Job #122569) * ** cURL has been upgraded 8.10.1 #2684191 (Job #122784) ** Corrected crash when authentication fails during istat operation. #2684190 (Job #119735) ** On Windows, network share access permissions for RCS depot archives can cause a crash. This has been resolved. #2682372 (Job #123443) ** Commands run through a broker and then forwarded to another server will no longer cause hangs for successive commands run on the same connection after a client could have reported client stats. #2682087 (Job #117647) ** A crash in 'p4 transmit -r' has been corrected. #2680581 (Job #121121) ** Corrected an unexpected 'Files are missing as a result of one or more move operations' error in the fetch, push, and zip commands. #2678661(Job #123034) ** Setting a trigger command to an empty string will now result in an error on execution rather than allow the undefined behavior. #2676563 (Job #123250) ** Security fix. Addressed CVE-2024-10314, CVE-2024-10344 and CVE-2024-10345 #2672451 (Job #120977) ** Fixed a problem where a user with openstreamspec permission could open a stream spec but not edit the stream spec. Also fixed a problem where a user with writestreamspec permission could not edit and save a new stream spec. #2670374 (Job #123015) ** Fixed locking order bug when obliterating a stream and the configurable index.domain.owner is 1. #2666580 (Job #123094) * ** *** **** OpenSSL has been upgraded to 3.0.15 #2660857 (Job #113058) ** Fixed stream spec obliterate problem where a super or admin user could not obliterate the stream spec if configurable dm.protects.streamspec was set to 1. #2659107 (Job #122472) ** A rare infinite loop caused by an over-optimisation when scanning the rev table has been fixed. #2656735 (Job #121134) ** Fixed istat crash with noinherit ParentView when db.bodtextcx rows are missing. #2648896 (Job #117955) * ** The zlib deflate operation uses x64 instructions not supported on older CPUs raising an illegal instruction exception. This has been fixed. #2648680 (Job #120764) ** Removed unnecessary error "Error object passsed to database already with an error" when attempting to switch a stream workspace with unresolved issues. #2641569 (Job #119153) * The performance of 'p4 streams --viewmatch //...' and similar wildcarded paths has been improved by changing the output to include all lines in the stream whose depot mappings intersect with the wildcarded path, rather than identifying the specific line that is used to map a given file in the stream. Specific matching lines are still returned when a single file is used as the --viewmatch argument. #2639165 (Job #115877) ** On an edge-server 'p4 submit' following a 'p4 integ -v' could fail with "No such file or directory". This change fixes the problem. Bugs fixed in 2023.2 Patch 6 (2023.2/2633816) (2024/08/02) #2633514 (Job #121790) ** If a virus scanner locks a portion of an RCS temp file during a pull operation, a crash may occur. This has been corrected. #2631134 (Job #119346) ** In case of a commitServer-Edge-ForwardingReplica chain, there was a problem where on ForwardingReplica a 'p4 submit' after Integ/Resolve could fail because archive files were missing on the Edge server. This change fixes the problem by pulling the missing archive-files for the Edge server when needed, allowing 'p4 submit' to succeed. #2631130 (Job #119795) ** For p4 fetch', if '-I' flag is used the command could fail unexpectedly with a 'Cannot import' error. This change fixes the problem. #2630390 (Job #121621) ** Setting a very low value of db.checkpoint.reqlevel can allow a multifile parallel checkpoint or dump to skip small db.files. This has been fixed. #2620238 (Job #121119) *** Fix for client 'clobber' option being dropped when syncing through a proxy. #2619519 (Job #119772) ** Fixed a journal inconsistency issue on non-Windows platforms caused by killing a running p4 command. #2619516 (Job #121240) ** The 'p4 lock' and 'p4 unlock' commands can now be cancelled by using 'p4 monitor terminate' or pressing Ctrl-C on the client. #2613923 (Job #110263) ** This change fixes a performance problem in 'p4 obliterate' where it was causing excessive time on edge-server to purge related db.label records. #2613565 (Job #114829) ** For 'p4 fstat' locking db.revcx for long period could block other commands like 'p4 submit' to run simultaneously. This change fixes the problem by altering db.revcx lock mode to PEEK mode, if db.peeking is set to greater than 2. #2613267 (Job #115232) ** This change introduces a new flag, -E, for p4 copy. The -E flag overrides the current setting for the 'dm.integ.tweaks' configurable and its effect is the same as having 'dm.integ.tweaks' set to 32. This flag, similar to the configurable 'dm.integ.tweaks', is kept undoc. #2612833 (Job #121091) ** Fixed reversion of an open stream spec when using the command 'p4 revert -a -Si filelist...'. #2611936 (Job #87618) ** Ignored branch records resulting from a cherry-pick now only grant credit for the cherry-picked revisions, rather than implicitly including all prior revisions as is the case for a normal branch record. This fixes a problem in which an ignored branch of a file that was copied from an old revision did not grant any credit at all on subsequent integrations. #2611912 (Job #120791) ** Fixed stream obliterate endless loop problem. #2610994 (Job #121079) ** Fixed reversion of an open stream spec when using the command 'p4 revert -n -Si filelist...'. #2608651 (Job #120840) ** If a Helix Core Server is configured with no logging, a crash may occur. This has been corrected. Bugs fixed in 2023.2 Patch 5 (2023.2/2605454) (2024/05/31) #2605272 (Job #112564) ** Added 'dm.protects.exclusioncheck' check to 'p4 servers', 'p4 remotes', 'p4 switch', and 'p4 print'. #2604189 (Job #118997) ** 'dm.protects.exclusioncheck' no longer blocks the owner of sub-protection table from modifying it. #2601050 (Job #115864) ** The client filesize cache data is now replicated. If filesize data needs to be generated on a replica, the required archives are pulled on-demand if not already replicated. #2600788 (Job #120474) ** Replication of a journal rotation event from an upstream server using journalcopy can no longer enter a loop. #2600787 (Job #116689) ** Replicas configured with 'lbr.replication=cache' will now check for a running archive pull thread before triggering deferred archive replication for files being sync'ed. #2583561 (Job #119810) ** The error message "db.group locked after db.stream" no longer appears when submitting a stream spec on an edge server and then issuing a stream command. Previously, this error could occur in P4V or any client that uses a shared connection. #2581410 (Job #119854) ** *** Client stats are no longer collected when a proxy server prior to this patch is used, preventing a potential hang when multiple commands are run on the same connection. #2580609 (Job #113605) ** When 'p4 verify -S @=' is run with a change# that is not shelved, or was shelved previously and then the shelf was deleted, 'p4 verify' for this case would incorrectly output files from other shelved changes. This change fixes the problem. #2579716 (Job #119203) ** A non-parallel checkpoint request using more than one thread did not ensure that the CHECKPOINT_HEADER note appeared as the first line in the output file. Also the same checkpoint on a Windows platform did not use the correct line ending. This has been fixed. Bugs fixed in 2023.2 Patch 4 (2023.2/2578891) (2024/03/29) #2578808 (Job #119853) ** A performance regression introduced in the 2023.1 release for the 'p4 fstat' command with a large client map has been corrected to previous release levels. #2576343 (Job #112901) ** If a file was added with the same name as a file which had previously been moved, then a 'p4 verify' might erroneously report the readded file was missing. This has been fixed. #2576339 (Job #119453) ** Fixed "db.streamview locked after db.domain" error when submitting an opened stream spec. #2571460 (Job #119638) ** Ensure all interfaces are listed in tagged output for 'p4 license -L'. #2571445 (Job #119620) ** The initial 2023.2 release changed the order of precedence for multiple 'p4 labelsync' arguments that reference the same depot file. This change reverts it to the 2022.2 behavior. Note that the behavior of conflicting labelsync arguments is not currently documented or formally defined, so any workflows that depend on it are unsupported, and may be negatively impacted by this patch. #2567132 (Job #119493) ** Fixed stream view generation at a specific change causing an endless loop during upgrade, where the loop occurs for the stream's ancestors and the stream itself is not in the loop. #2567021 (Job #119441) ** The aggregate MD5 was not created for a parallel checkpoint on a replica. This has been fixed. #2569178 (Job #114849) ** The fix for job #84375 inadvertently caused issues for the 'SearchBindPasswd' field of the 'p4 ldap' specification, resulting in authentication failures when using that LDAP connection; this has been fixed Bugs fixed in 2023.2 Patch 3 (2023.2/2563409) (2024/02/27) #2558646 (Jobs #118375, #112333) ** On Windows the atomic rename api is limited in scope by the OS. With this change the atomic rename is first attempted, if the atomic rename fails the operation falls back to a copy truncate. #2557887 (Job #119417) ** Fixed a crash when 'p4 unshelve -b/-S' encountered an error. #2556700 (Job #102151) ** This change improves 'p4 sync' performance with complex views by increasing the lookback limit from the previous value of 8 to a value set by the new configurable maxLookBack with a default value of 1000. #2555959 (Job #116293) ** 'p4 search' could get stuck when putting a read-lock on the ixtext table. This change fixes the problem by switching to lockless access for the table. #2555497 (Job #116539) ** It was possible for the table dump command 'p4d -jd' to create the MD5 checksum file even when the command had failed. This has been fixed. #2553624 (Job #119254) ** A parallel recovery would leak memory on note entries in the replay file(s). This has been fixed. #2554082 (Job #119336) ** OpenLDAP has been upgraded 2.4.17 #2552714 (Job #118004) ** On-demand fetching of archives from a replica will now cause the commit server to perform a fetch on-demand if the archive has not yet been transferred from an edge server as part of a background submit. The client requesting the file content will no longer receive a librarian error in this situation. #2551998 (Job #118593) ** An Extension implementing a 'pressure-pause' hook no longer prevents updates to the trigger table. #2548434 (Job #118559) * ** *** **** Clients now call shutdown() before closing a network connection in order to process all pending packets and ensure a clean connection shutdown. In particular, pending packets will not be lost when a client is terminated via control-c (^C). #2548082 (Jobs #107457, #117470, #118998, #117719) * ** *** **** Improve SSL connection establishment under heavy load. In particular, this eliminates the "wrong version number" error when the client is slow to initiate the SSL handshake after establishing the TCP connection. Improve SSL error detection and handling to prevent reporting non-existent SSL errors. Previously this was theoretically possible but had not been observed. Ignore spurious SSL errors detected during SSL client and server initialization to prevent reporting non-existent SSL errors. Previously this was theoretically possible but had not been observed. Make SSL error handling more robust and provide more detailed and user-friendly SSL error messages. #2547699 (Job #118566) ** Parallel recoveries did not detect a character set mismatch between the server and recovery files. This has been fixed. #2546176 (Job #118002) ** 'p4 obliterate' can no longer write archive delete journal notes when a journal rotation is in progress. #2544323 (Job #118360) ** Replacing a trait value that had been saved in the trait depot with a value that is saved in db.traits would cause the trait depot depotfile to not be removed. This has been fixed. #2541675 (Job #115632) ** Fixed auto-shelve of modified content on distribution server when switching between streams. #2538285 (Job #118756) ** Attempts to assign a negative value to a date field are now blocked. #2538275 (Job #118549) ** The server does not handle date fields containing negative values correctly. This has been fixed. Bugs fixed in 2023.2 Patch 2 (2023.2/2535420) (2023/12/19) #2534278 (Job #118635) ** A severe performance regression for 'p4 jobs -e Date>=yyyy/mm/dd' and similar queries was introduced in the initial 2023.2 release, causing all numeric db.ixtext entries to be scanned in the course of retrieving dates matching the specified range. This is fixed. #2533190 (Job #114420) ** 'p4 renameuser' no longer takes long write locks on db.monitor. #2528293 (Job #118342) ** The monitor level stored by 'rt.monitorfile' is no longer reset to 0 when each new command starts. #2532094 (Job #116191) ** Fixed DVCS fetch, push and zip commands incorrectly reporting a split move across changelists. #2531016 (Job #118395) ** Set digest/filesize on text+k files for 'p4 change -t' command. Bugs fixed in 2023.2 Patch 1 (2023.2/2523307) (2023/11/22) #2523153 (Job #118298) ** Back out change 2490421 as it has not had the desired effect in customer environments. #2521944 (Job #118198) ** 'p4 license -L' no longer reports the MAC addresses of network interfaces that do not have IPv4 or IPv6 addresses. Bugs fixed in 2023.2 (2023.2/2519561) (2023/11/14) #2516988 (Job #116628) ** Revisions without an archive that were retyped using the force flag could cause an error when replicated to an edge. These revisions are now marked as 'missing' and ignored for replication. 'p4 fstat' in tagged mode will report the 'isMissing' tag for these revisions. #2512340 (Job #117646) ** 'p4 unshelve' with multiple files as parameters, if this file-list is not sorted, could erroneously report 'can't unshelve (already opened for edit using a different client view path)'. This change fixes the problem. #2508491 (Job #116102) * ** *** **** OpenSSL has been upgraded to 3.0.12 #2505273 (Job #112432) ** 'p4 fetch' and 'p4 push' commands now update LastFetch/LastPush when user provided filespec argument does not limit remote view. #2504803 (Job #117741) * ** cURL (for extensions) has been upgraded 8.4.0 to address multiple cURL CVEs: CVE-2023-38545 and CVE-2023-38546 #2499611 (Job #90618, #117153) * ** *** **** Security fix. Addressed CVE-2023-5759. #2496083 (Job #117185) ** The 'db.checkpoint.threads' configurable override was not supported for non-parallel checkpoint and dump requests started directly with 'p4d' via the '-N threads' option and requests started by the 'p4 admin checkpoint' command via the '-n threads' option. This has been fixed. #2495972 (Job #114613) ** If 'p4 unlock -f' is run for a bunch of individual files, it could result unnecessary scanning of db.domain and holding lock on this table for a long period of time, blocking out other commands. This change fixes the problem. #2494767 (Job #117156) ** Security fix. Addressed CVE-2023-35767. #2493556 (Job #117155) ** Security fix. Addressed CVE-2023-45849. #2491456 (Job #107898) ** 'p4 annotate' unnecessarily scanned additional db.rev records when following integration history through files with protection exclusions. This has been fixed. #2491397 (Job #117154) ** Security fix. Addressed CVE-2023-45319. #2490421 (Job #107457) * ** *** **** Failed SSL connection attempts now produce more detailed and accurate error messages, making it easier to diagnose incorrect SSL configurations. In particular, if a server is experiencing more simultaneous SSL connection attempts than it can handle then it will produce a message to that effect rather than producing a generic SSL failure message. Additionally, transient connection errors are retried more robustly, so some connection attempts that would previously have failed may now succeed. #2489148 (Job #117392) ** There was a data race between threads in the 'p4 storage -U' command. This has been fixed. #2488264 (Job #117222) ** Ensures that 'p4d -jr' command to replay the checkpoint in a non empty directory does not update the existing database files. #2488070 (Job #117270) ** Fixed a component stream validation error when reparenting a stream. #2487821 (Job #114933) ** When a lazy copy file is sent using 'p4 unzip', 'p4 push' or 'p4 fetch' and the source is not part of the package, it will be imported as a non-lazy copy file. #2484430 (Job #113319) ** Using 'p4 unzip' with -I option to exclude integration records no longer causes a crash when the source of a lazy copy is not included in the zip. #2482627 (Job #106491) ** 'p4 zip' correctly includes archives for lazy copies when used with a revision range. #2482523 (Jobs #117098, #117137) ** For a parallel checkpoint operation, the start time and end time in the checkpoint history record were the same and the 'checkpoint' and 'journal' fields in the 'rotate-journal' trigger were not set. This has been fixed. #2481875 (Job #117071) ** For 'changes -m -u' it may produce less than m lines, missing valid records in the output. For 'p4 changes' with -i closure option, it may produce result that does not include changes for the files in the source of integration. #2479809 (Job #117093) ** The orphan scanner, 'p4 storage -l', does not work with space in the depotdirectory argument. This has been fixed. #2475698 (Job #114250) ** Concurrent 'p4 unlock' and 'p4 lock' commands can result a deadlock and system hang. This change fixes the problem. #2474301 (Job #116821) ** Some commands that take file paths with changelists specifiers will now position in db.rev to get to the next file instead of scanning. #2469524 (Job #116678) ** 'p4 submit' will no longer clear the commandGroup identifier during the submit process. #2468060 (Job #111780) ** For 'p4 shelve' with a lot of content that dedups to existing content, it produces lots of shelf archives to be deleted. In these cases database tables stay locked for extended periods of time, resulting performance degradation for other commands. This change improves on this kind of database lock time. #2467384 (Job #115204) ** For 'p4 changes -m @', this change improves performance by quickly skipping over changes that have a non-matching path. #2464103 (Job #115529) ** Many 'p4 diff2' commands run simultaneously can hold lock on db.revsh blocking other commands for long periods of time. This change improves performance by making db.revsh access lockless. #2463813 (Job #115585) ** 'p4 topology --explain' now displays the long-form syntax for all the topology options. #2463373 (Job #116078) ** A chained edge uses the server protocol version of the upstream edge rather than the server protocol version of the commit server. This has been fixed. #2463256 (Job #115584) ** 'p4 topology -m' command now results in topology usage error when used with the options '-a' or '-d'. #2462781 (Job #116121) ** P4ALTSYNC will now generate a digest on the fly for files that do not have checksums stored in the database. #2462372 (Job #116376) ** The precedence of overlapping ChangeView entries, including those generated for streams with multiple "import @change" Paths, was not honored correctly. This has been fixed. #2462343 (Job #116382) ** 'p4 fstat -e CHANGE' would unnecessarily scan db.rev records for files open in other changelists, making it very inefficient when there were many such files. This has been fixed. #2461940 (Job #116409) ** The stdout is now flushed after the starting checkpoint message is generated. This is to help scripts determine the current checkpoint number in use. #2461702 (Job #116306) ** Multifile checkpoints and dumps could contain duplicate records. This has been fixed. #2461701 (Job #116373) ** The p4d help message now includes details on the -xj option to display db.ckphist records. #2460758 (Job #115558) ** 'p4 unshelve' is no longer allowed for altsync enabled clients when P4ALTSYNC is not configured correctly. #2459572 (Job #116187) ** P4ALTSYNC now works as expected with forwarding replicas. #2459572 (Job #116348) ** Command group logging information is now correctly passed upstream from forwarding-replicas. #2459453 (Job #116334) ** Tracking metrics for 'rdb.lbr' activity is now reported for scheduling the transfers of missing and bad depot files during a 'p4 verify -t' command. #2457982 (Job #116141, #116277) ** Fixed problems with upgrade when a stream's view could not be generated. #2456741 (Job #116101) * ** cURL (for extensions) has been upgraded 8.1.2 to address multiple cURL CVEs: CVE-2023-28319 and CVE-2023-28322 #2455354 (Job #115964) ** 'p4 streams -F' would automatically escape the '&' query operator in the special case where it immediately followed the string 'import'; this would cause a query parse error when combining two queries with '&' if the first query ended with 'import'. The automatic escaping behavior has been removed and 'p4 help streams' has been clarified to explain how to escape query operators that are part of a search expression. #2454956 (Job #115981) ** 'p4 sync' of a symlink type file with P4ALTSYNC no longer causes an infinite loop. #2453580 (Job #116086) ** 'p4 fstat -m1 -S //...` once again performs a correct count of all files. #2452968 (Job #114741, #115631, #115812) ** 'p4 streams --viewmatch' has been significantly reworked in order to more accurately return the exact set of streams whose views match a given depot file and to eliminate unnecessary scans of db.streamviewx. #2452668 (Job #116033) ** 23.1 or later edge servers will now omit the altsync option if the commit server has not been upgraded to at least 23.1. #2450824 (Job #114820) ** 'p4 reload -p' will now correctly report errors to the users and if a journalwait is required, the correct journal offset is now used. #2449796 (Job #116005) ** 'p4 add' of a file in a client overlay path could unnecessarily scan all mapped db.revhx records. Fixed. #2448510 (Job #114845) ** Parallel checkpoint and dump operations now create an aggregate MD5 file to indicate success. #2445284 (Job #114041) ** For 'p4 submit' of a graph depot repository if the repository includes submodule the submit would corrupt the repository by replacing the submodule with the directory of the submodule. This change fixes the problem. #2442805 (Job #115714) ** 'p4 fstat -Oz' did not display lazy copies of purged or deleted revisions. This has been fixed. #2442681 (Job #115619) ** Fixed a 'p4 zip' bug where one half of a move/delete pair was wrongly declared to be missing. #2440369 (Job #115687) ** This ensures that the respective intermediary server log is not spammed with the topology server warning related to skipping the capture of the server records in the db.topology table in case of any upstream server that is not upgraded to the version >= 2021.2. #2437067 (Job #110437) * ** *** **** The network autotune algorithm has been corrected to address the rare cases where large numbers of files being submitted to a Linux server from a Windows client could stall or hang if autotune was enabled (net.autotune=1). #2434383 (Job #115391) ** Fixed stream view generation at a specific change causing an endless loop during upgrade. #2433630 (Job #115113) ** Missing archives no longer cause 'p4 renameuser' to crash. #2433577 (Job #115504) ** For the graph depot command 'p4 receive-pack' if the pack-file includes merge commits, it is possible for the process to take apparently infinite time and never finish. This can show up as a git-connector mirroring update that never completes. This change fixes the problem. #2427917 (Job #114334) ** If a stream has one or more components, and a stream client is set to have a StreamAtChange for a change which did not involve the stream spec, then the client view might not include the component stream views, or they might be wrong. This has been fixed. #2427515 (Job #114761) ** A 'p4 retype -l' request on a revision with a shelved integration generates incorrect records in the db.storage and db.storagesh tables. This has been fixed. #2426423 (Job #100988) ** 'p4 undo' previously gave a empty error message when there were conflicts between different open actions for the same file. Now it correctly reports the problematic file, the two conflicting actions, and relevant changelist numbers that can be used to break the undo up into non-conflicting ranges. #2424554 (Job #87367) * P4IGNORE now defaults to '.p4ignore', 'p4ignore.txt', '$HOME/.p4ignore' and '$HOME/p4ignore.txt'. #2423690 (Job #115128) ** This change fixes a bug in 'p4 changes' when it is used with options '-m @'. If the '-m' value is bigger than 10% of the number of changes, and the filepath does not match the first file in a change but matches other files in the change, then the change would be skipped. This change fixes the problem. #2423392 (Jobs #114708, #114712) ** The default fields to the display checkpoint history command, 'p4d -xj', now includes the 'end' date stamp of the operation. The journal date field is now set to the current time for a parallel checkpoint or dump request. #2422126 (Job #114848) ** *** p4 pull -l' command could put shared lock on rdb.lbr for the whole duration of the command running, resulting overall performance degradation for edge or proxy servers. This improves the performance by changing 'pull -l' to quickly read all the records it needs and release the lock. -------------------------------------------------------------------------- Major new functionality in 2023.1 (2023.1/2442900) (2023/05/15) #2413980 (Job #104786) * ** *** Support for alternative sync agents The client spec has a new '[no]altsync' option which specifies if the client application should use an alternative sync agent (specified by the P4ALTSYNC environment variable) to perform file operations. The alternative sync agent will be invoked once per connection and will be provided with file metadata instead of the client application writing file content directly; the primary use-case for this functionality is to update the state of virtual file service providers. See: P4ALTSYNC in Helix Core Command-Line (P4) Reference #2350943, #2339529, #2328309 (Jobs #112184, #112183, #111439) ** Parallel checkpoint and dump operations accept an 'm' sub-option, that allows each individual database table to be split into multiple checkpoint or dump files. This should allow the checkpoint/dump workload to be spread more evenly between the available threads. The recovery operation supports the 'p' sub-option to recover a parallel checkpoint directory. See: "Parallel checkpointing, dumping and recovery" in the Helix Core Server Administrator Guide Technology Preview features in 2023.1 (2023.1/2442900) (2023/05/15) #2419976 (Job #5077, #67496, #72878, #108158, #108325, #110287) ** Helix Core Server System Resource Monitoring The server can now meter the amount of incoming work it accepts, pausing or rejecting client requests if the amount of free operating system memory or CPU availability is past a configurable threshold. This feature is platform-specific. CPU pressure responsiveness is only available on Linux systems with cgroups v2 configured. Memory awareness is available on all Linux versions as well as Windows, but not on MacOS. Contact Technical Support for guidance when enabling this feature in a production environment. See 'p4 help server-resources' for further information. Minor new functionality in 2023.1 (2023.1/2442900) (2023/05/15) #2413707 (Job #19809) * ** 'p4 sizes' has a new '-C' flag which causes the filesizes reported to be based on the size that the file would be if written with the current client connection; this accounts for line-ending conversion, charset conversion for unicode/utf8/utf16 filetypes (including the value of 'filesys.utf8bom') and keyword expansion for +k type files. These variables may be overridden with the following additional new flags: -B utf8bom - Override 'filesys.utf8bom' for utf8 type files -K - Collapse keywords for +k type files -L line-ending - Override the client's line ending setting -Q charset - Override P4CHARSET for unicode type files #2408924 (Job #114224) ** Logs now include the amount of time a command has spent in the paused state (e.g. via 'p4 monitor pause'). Tracking output in the P4LOG log file will show lines like '--- paused $seconds'. Version 56 of the 'CommandEnd' event (1.56) in the structured logs has a new field that represents the same data. The 'serverlog.version.N' configurable can be used to pin a structured log file to a specific server version's format. To retain the prior structured log events format, set the 'serverlog.version.N' configurable to 55. #2399143 (Job #95529) ** The new 'p4 integrated -m ' option reports the latest integration records. #2397436 (Job #112553) ** The server on Linux can now protect itself from the OOM killer during database writes. This happens automatically when the necessary capabilities have been granted to the server executable, e.g. "sudo setcap 'CAP_SYS_RESOURCE=+ep' p4d". A new server startup log entry is now written with details about the detected level of support for features like this. #2396097 (Job #112520) ** 'p4 topology -m' now allows the user to mark the server record as moved. Please see 'p4 help topology' for details. #2394721 (Job #112311) ** New server type 'distribution-server', can be used for content distribution, requires new specific license. #2380883 (Job #113299) ** The 'p4 admin checkpoint' command now supports the parallel checkpoint and multifile options (-p, -m, -N threads). #2373917 (Job #112371) ** Long-running server processes now release more memory back to the OS, resulting in up to half as much memory usage in some situations. #2368014 (Job #112446) * ** Compression-related tasks are now ~38% faster on 64-bit X86. E.g. 'p4 submit' on 'binary' filetypes. #2367890 (Job #110101) *** **** The default Perforce mimalloc memory manager configurables are now used in the Proxy and Broker. #2359921 (Job #111565) ** New flag --preserve-change-numbers added to 'p4 push' and 'p4 fetch' may be used to preserve the pushed/fetched change numbers on the target server, command will fail if there are any conflicting changelist numbers. Configurable 'dm.fetch.preservechangenumbers' disabled by default, can be enabled (set to 1) on the target server for the same effect, server restart not required. #2358093 (Job #112666) ** 'p4 topology -D' now accepts the destination server address and the server id to delete the record. Please see 'p4 help topology' for details. Bugs fixed in 2023.1 Patch 7 (2023.1/2693640) (2024/12/10) #2692636 (Job #122076) * The command-line client on Windows now prints an error when it detects ambiguous argument encoding. #2689099 (Job #114420) ** 'p4 renameuser' no longer takes long write locks on db.monitor. #2686336 (Job #122784) ** Corrected crash when authentication fails during istat operation. #2685392 (Job #122569) * ** cURL has been upgraded 8.10.1 #2685151 (Job #119735) ** On Windows, network share access permissions for RCS depot archives can cause a crash. This has been resolved. #2682942 (Job #117647) ** A crash in 'p4 transmit -r' has been corrected. #2680582 (Job #121121) ** Corrected an unexpected 'Files are missing as a result of one or more move operations' error in the fetch, push, and zip commands. #2679937 (Job #114613) ** If 'p4 unlock -f' is run for a bunch of individual files, it could result unnecessary scanning of db.domain and holding lock on this table for a long period of time, blocking out other commands. This change fixes the problem. #2678662 (Job #123034) ** Setting a trigger command to an empty string will now result in an error on execution rather than allow the undefined behavior. #2676561 (Job #123250) ** Security fix. Addressed CVE-2024-10314, CVE-2024-10344 and CVE-2024-10345 #2671237 (Job #120977) ** Fixed a problem where a user with openstreamspec permission could open a stream spec but not edit the stream spec. Also fixed a problem where a user with writestreamspec permission could not edit and save a new stream spec. #2670367 (Job #123015) ** Fixed locking order bug when obliterating a stream and the configurable index.domain.owner is 1. #2666580 (Job #123094) * ** *** **** OpenSSL has been upgraded to 3.0.15 #2660279 (Job #113058) ** Fixed stream spec obliterate problem where a super or admin user could not obliterate the stream spec if configurable dm.protects.streamspec was set to 1. #2648895 (Job #117955) * ** The zlib deflate operation uses x64 instructions not supported on older CPUs raising an illegal instruction exception. This has been fixed. #2640332 (Job #120764) ** Removed unnecessary error "Error object passsed to database already with an error" when attempting to switch a stream workspace with unresolved issues. Bugs fixed in 2023.1 Patch 6 (2023.1/2633133) (2024/08/01) #2632065 (Job #121790) ** If a virus scanner locks a portion of an RCS temp file during a pull operation, a crash may occur. This has been corrected. #2631131 (Job #119346) ** In case of a commitServer-Edge-ForwardingReplica chain, there was a problem where on ForwardingReplica a 'p4 submit' after Integ/Resolve could fail because archive files were missing on the Edge server. This change fixes the problem by pulling the missing archive-files for the Edge server when needed, allowing 'p4 submit' to succeed. #2631129 (Job #119795) ** For p4 fetch', if '-I' flag is used the command could fail unexpectedly with a 'Cannot import' error. This change fixes the problem. #2630390 (Job #121621) ** Setting a very low value of db.checkpoint.reqlevel can allow a multifile parallel checkpoint or dump to skip small db.files. This has been fixed. #2620239 (Job #121119) *** Fix for client 'clobber' option being dropped when syncing through a proxy. #2619518 (Job #119772) ** Fixed a journal inconsistency issue on non-Windows platforms caused by killing a running p4 command. #2619515 (Job #121240) ** The 'p4 lock' and 'p4 unlock' commands can now be cancelled by using 'p4 monitor terminate' or pressing Ctrl-C on the client. #2613734 (Job #115232) ** This change introduces a new flag, -E, for p4 copy. The -E flag overrides the current setting for the 'dm.integ.tweaks' configurable and its effect is the same as having 'dm.integ.tweaks' set to 32. This flag, similar to the configurable 'dm.integ.tweaks', is kept undoc. #2613026 (Job #112564) ** Added 'dm.protects.exclusioncheck' check to 'p4 servers', 'p4 remotes', 'p4 switch', and 'p4 print'. #2612594 (Job #114829) ** For 'p4 fstat' locking db.revcx for long period could block other commands like 'p4 submit' to run simultaneously. This change fixes the problem by altering db.revcx lock mode to PEEK mode, if db.peeking is set to greater than 2. #2611896 (Job #121091) ** Fixed reversion of an open stream spec when using the command 'p4 revert -a -Si filelist...'. #2610973 (Job #120791) ** Fixed stream obliterate endless loop problem. #2610961 (Job #87618) ** Ignored branch records resulting from a cherry-pick now only grant credit for the cherry-picked revisions, rather than implicitly including all prior revisions as is the case for a normal branch record. This fixes a problem in which an ignored branch of a file that was copied from an old revision did not grant any credit at all on subsequent integrations. #2609822 (Job #121079) ** Fixed reversion of an open stream spec when using the command 'p4 revert -n -Si filelist...'. #2609129 (Job #120840) ** If a Helix Core Server is configured with no logging, a crash may occur. This has been corrected. #2606107 (Job #120474) ** Replication of a journal rotation event from an upstream server using journalcopy can no longer enter a loop. #2606075 (Job #115864) ** The client filesize cache data is now replicated. If filesize data needs to be generated on a replica, the required archives are pulled on-demand if not already replicated. #2603176 (Job #110263) ** This change fixes a performance problem in 'p4 obliterate' where it was causing excessive time on edge-server to purge related db.label records. #2601166 (Job #118997) ** 'dm.protects.exclusioncheck' no longer blocks the owner of sub-protection table from modifying it. #2580610 (Job #113605) ** When 'p4 verify -S @=' is run with a change# that is not shelved, or was shelved previously and then the shelf was deleted, 'p4 verify' for this case would incorrectly output files from other shelved changes. This change fixes the problem. #2580259 (Job #119810) ** The error message "db.group locked after db.stream" no longer appears when submitting a stream spec on an edge server and then issuing a stream command. Previously, this error could occur in P4V or any client that uses a shared connection. #2579717 (Job #119203) ** A non-parallel checkpoint request using more than one thread did not ensure that the CHECKPOINT_HEADER note appeared as the first line in the output file. Also the same checkpoint ona Windows platform did not use the correct line ending. This has been fixed. Bugs fixed in 2023.1 Patch 5 (2023.1/2576871) (2024/03/25) #2576352 (Job #112901) ** If a file was added with the same name as a file which had previously been moved, then a 'p4 verify' might erroneously report the readded file was missing. This has been fixed. #2576348 (Job #119453) ** Fixed "db.streamview locked after db.domain" error when submitting an opened stream spec. #2570973 (Job #119620) ** The initial 2023.1 release changed the order of precedence for multiple 'p4 labelsync' arguments that reference the same depot file. This change reverts it to the 2022.2 behavior. Note that the behavior of conflicting labelsync arguments is not currently documented or formally defined, so any workflows that depend on it are unsupported, and may be negatively impacted by this patch. #2569182 (Job #114849) ** The fix for job #84375 inadvertently caused issues for the 'SearchBindPasswd' field of the 'p4 ldap' specification, resulting in authentication failures when using that LDAP connection; this has been fixed #2567499 (Job #119441) ** The aggregate MD5 was not created for a parallel checkpoint on a replica. This has been fixed. #2566234 (Jobs #118375, #112333) ** On Windows the atomic rename api is limited in scope by the OS. With this change the atomic rename is first attempted, if the atomic rename fails the operation falls back to a copy truncate. #2564640 (Job #119493) ** Fixed stream view generation at a specific change causing an endless loop during upgrade, where the loop occurs for the stream's ancestors and the stream itself is not in the loop. #2562156 (Job #119336) ** OpenLDAP has been upgraded 2.4.17 Bugs fixed in 2023.1 Patch 4 (2023.1/2560797) (2024/02/22) #2557622 (Job #119417) ** Fixed a crash when 'p4 unshelve -b/-S' encountered an error. #2557496 (Job #116539) ** It was possible for the table dump command 'p4d -jd' to create the MD5 checksum file even when the command had failed. This has been fixed. #2557184 (Job #116293) ** 'p4 search' could get stuck when putting a read-lock on the ixtext table. This change fixes the problem by switching to lockless access for the table. #2557097 (Job #102151) ** This change improves 'p4 sync' performance with complex views by increasing the lookback limit from the previous value of 8 to a value set by the new configurable maxLookBack with a default value of 1000. #2553623 (Job #119254) ** A parallel recovery would leak memory on note entries in the replay file(s). This has been fixed. #2552713 (Job #118004) ** On-demand fetching of archives from a replica will now cause the commit server to perform a fetch on-demand if the archive has not yet been transferred from an edge server as part of a background submit. The client requesting the file content will no longer receive a librarian error in this situation. #2552001 (118593) ** An Extension implementing a 'pressure-pause' hook no longer prevents updates to the trigger table. #2547700 (Job #118566) ** Parallel recoveries did not detect a character set mismatch between the server and recovery files. This has been fixed. #2546175 (Job #118002) ** 'p4 obliterate' can no longer write archive delete journal notes when a journal rotation is in progress. #2538969 (Job #115632) ** Fixed auto-shelve of modified content on distribution server when switching between streams. Bugs fixed in 2023.1 Patch 3 (2023.1/2534247) (2023/12/15) #2531279 (Job #116191) ** Fixed DVCS fetch, push and zip commands incorrectly reporting a split move across changelists. #2531018 (Job #118342) ** Fixed segmentation violation with real-time monitoring enabled. #2531015 (Job #118395) ** Set digest/filesize on text+k files for 'p4 change -t' command. Bugs fixed in 2023.1 Patch 2 (2023.1/2513900) (2023/11/03) #2512341 (Job #117646) ** 'p4 unshelve' with multiple files as parameters, if this file-list is not sorted, could erroneously report 'can't unshelve (already opened for edit using a different client view path)'. This change fixes the problem. #2510947 (Job #117156) ** Security fix. Addressed CVE-2023-35767. #2510257 (Job #117185) ** The 'db.checkpoint.threads' configurable override was not supported for non-parallel checkpoint and dump requests started directly with 'p4d' via the '-N threads' option and requests started by the 'p4 admin checkpoint' command via the '-n threads' option. This has been fixed. #2510009 (Job #112432) ** 'p4 fetch' and 'p4 push' commands now update LastFetch/LastPush when user provided filespec argument does not limit remote view. #2510008 (Job #117155) ** Security fix. Addressed CVE-2023-45849. #2510007 (Job #90618, #117153) * ** *** **** Security fix. Addressed CVE-2023-5759. #2509225 (Job #111780) ** For 'p4 shelve' with a lot of content that dedups to existing content, it produces lots of shelf archives to be deleted. In these cases database tables stay locked for extended periods of time, resulting performance degradation for other commands. This change improves on this kind of database lock time. #2508491 (Job #116102) * ** *** **** OpenSSL has been upgraded to 3.0.12 #2508379 (Job #117154) ** Security fix. Addressed CVE-2023-45319. #2507034 (Job #117098) ** For a parallel checkpoint operation, the start time and end time in the checkpoint history record were the same and the 'checkpoint' and 'journal' fields in the 'rotate-journal' trigger were not set. This has been fixed. #2505991 (Job #117741) * ** cURL (for extensions) has been upgraded 8.4.0 to address multiple cURL CVEs: CVE-2023-38545 and CVE-2023-38546 #2505638 (Job #117392) ** There was a data race between threads in the 'p4 storage -U' command. This has been fixed. #2498961 (Job #117071) ** For 'changes -m -u' it may produce less than m lines, missing valid records in the output. For 'p4 changes' with -i closure option, it may produce result that does not include changes for the files in the source of integration. #2498788 (Job #115204) ** For 'p4 changes -m @', this change improves performance by quickly skipping over changes that have a non-matching path. #2497916 (Job #114933) ** When a lazy copy file is sent using 'p4 unzip', 'p4 push' or 'p4 fetch' and the source is not part of the package, it will be imported as a non-lazy copy file. #2494346 (Job #117292) ** Parallel checkpoint and dump requests do not honor the 'db.checkpoint.bufsize' configurable. This has been fixed. Note, with this fix, 'filesys.bufsize' in no longer used to determine the checkpoint write size. #2494008 (Job #117270) ** Fixed a component stream validation error when reparenting a stream. #2489953 (Job #117222) ** Ensures that 'p4d -jr' command to replay the checkpoint in a non empty directory does not update the existing database files. #2489812 (Job #113319) ** Using 'p4 unzip' with -I option to exclude integration records no longer causes a crash when the source of a lazy copy is not included in the zip. #2489147 (Job #106491) ** 'p4 zip' correctly includes archives for lazy copies when used with a revision range. #2480069 (Job #117741, #117093) ** The orphan scanner, 'p4 storage -l', does not work with space in the depotdirectory argument. This has been fixed. #2478674 (Job #114250) ** Concurrent 'p4 unlock' and 'p4 lock' commands can result a deadlock and system hang. This change fixes the problem. #2473031 (Job #115529) ** Many 'p4 diff2' commands run simultaneously can hold lock on db.revsh blocking other commands for long periods of time. This change improves performance by making db.revsh access lockless. #2468926 (Job #115585) ** 'p4 topology --explain' now displays the long-form syntax for all the topology options. #2468905 (Job #115584) ** 'p4 topology -m' command now results in topology usage error when used with the options '-a' or '-d'. #2468481 (Job #110437) * ** *** **** The network autotune algorithm has been corrected to address the rare cases where large numbers of files being submitted to a Linux server from a Windows client could stall or hang if autotune was enabled (net.autotune=1). Bugs fixed in 2023.1 Patch 1 (2023.1/2468153) (2023/07/24) #2462781 (Job #116121) ** P4ALTSYNC will now generate a digest on the fly for files that do not have checksums stored in the database. #2462349 (Job #116376) ** The precedence of overlapping ChangeView entries, including those generated for streams with multiple "import @change" Paths, was not honored correctly. This has been fixed. #2462206 (Job #116382) ** 'p4 fstat -e CHANGE' would unnecessarily scan db.rev records for files open in other changelists, making it very inefficient when there were many such files. This has been fixed. #2461940 (Job #116409) ** The stdout is now flushed after the starting checkpoint message is generated. This is to help scripts determine the current checkpoint number in use. #2461701 (Job #116373) ** The p4d help message now includes details on the -xj option to display db.ckphist records. #2460758 (Job #115558) ** 'p4 unshelve' is no longer allowed for altsync enabled clients when P4ALTSYNC is not configured correctly. #2459572 (Job #116348) ** Command group logging information is now correctly passed upstream from forwarding-replicas. #2459572 (Job #116187) ** P4ALTSYNC now works as expected with forwarding replicas. #2459439 (Job #114905) ** 'p4 sync' is now more tolerant of out-of-memory conditions. Note that the extra error handling included in this fix makes 'p4 sync' honor MaxResults for files synced to the workspace or opened, where it previously did not. #2459434 (Job #114906) ** 'p4 filelog' is now more tolerant of out-of-memory conditions. #2459094 (Job #114845) ** Parallel checkpoint and dump operations now create an aggregate MD5 file to indicate success. #2459030 (Job #116306) ** Multifile checkpoints and dumps could contain duplicate records. This has been fixed. #2458373 (Job #116101) * ** cURL (for extensions) has been upgraded 8.1.2 to address multiple cURL CVEs: CVE-2023-28319 and CVE-2023-28322 #2458299 (Job #116141, #116277) ** Fixed problems with upgrade when a stream's view could not be generated. #2455092 (Job #114741) ** Fixed a stream viewmatch bug where an exclude path might obscure a share path in the generated streamviews. #2454956 (Job #115981) ** 'p4 sync' of a symlink type file with P4ALTSYNC no longer causes an infinite loop. #2453231 (Job #114820) ** 'p4 reload -p' will now correctly report errors to the users and if a journalwait is required, the correct journal offset is now used. #2453069 (Job #116086) ** 'p4 fstat -m1 -S //...` once again performs a correct count of all files. #2452668 (Job #116033) ** 23.1 or later edge servers will now omit the altsync option if the commit server has not been upgraded to at least 23.1. #2449758 (Job #116005) ** 'p4 add' of a file in a client overlay path could unnecessarily scan all mapped db.revhx records. Fixed. #2448511 (Jobs #114708, #114712) ** The default fields to the display checkpoint history command, 'p4d -xj', now includes the 'end' date stamp of the operation. The journal date field is now set to the current time for a parallel checkpoint or dump request. #2447644 (Job #115980) * ** *** **** OpenSSL has been upgraded to 1.1.1u #2446515 (Job #114761) ** A 'p4 retype -l' request on a revision with a shelved integration generates incorrect records in the db.storage and db.storagesh tables. This has been fixed. #2445284 (Job #114041) ** For 'p4 submit' of a graph depot repository if the repository includes submodule the submit would corrupt the repository by replacing the submodule with the directory of the submodule. This change fixes the problem. #2444620 (Job #115391) ** Fixed stream view generation at a specific change causing an endless loop during upgrade. #2444614 (Job #115619) ** Fixed a 'p4 zip' bug where one half of a move/delete pair was wrongly declared to be missing. #2443869 (Job #115687) ** This ensures that the respective intermediary server log is not spammed with the topology server warning related to skipping the capture of the server records in the db.topology table in case of any upstream server that is not upgraded to the version >= 2021.2. #2442805 (Job #115714) ** 'p4 fstat -Oz' did not display lazy copies of purged or deleted revisions. This has been fixed. Bugs fixed in 2023.1 (2023.1/2442900) (2023/05/15) #2440503 (Job #115503) * ** cURL (for extensions) has been upgraded 8.0.1 to address multiple cURL CVEs: CVE-2023-27537, CVE-2023-23916, CVE-2023-23915 and CVE-2023-23914 #2439308 (Job #112863, #115676 ) ** The 'p4 failover' command could be run from a server that has been prepared for the 'p4 failback' command by running 'p4d -Fm'. Now 'p4 failover' will fail in this situation with an error message instructing the user to run 'p4 failback' instead. #2434101 (Job #115504) ** For the graph depot command 'p4 receive-pack' if the pack-file includes merge commits, it is possible for the process to take apparently infinite time and never finish. This can show up as a git-connector mirroring update that never completes. This change fixes the problem. #2429038 (Job #114515) ** Running 'p4 reopen' with multiple file arguments that include moved files could cause a member of a moved pair to fail to be reopened. This has been fixed. #2423940 (Job #115128) ** This change fixes a bug in 'p4 changes' when it is used with options '-m @'. If the '-m' value is bigger than 10% of the number of changes, and the filepath does not match the first file in a change but matches other files in the change, then the change would be skipped. This change fixes the problem. #2419973 (Job #111678) ** Starting with release 2023.1, servers using central authentication (P4AUTH) require the central server's release version to be at least 2023.1. The central server must have a valid license, and must be running when its outer servers are starting up or being upgraded. #2419808 (Job #113805) ** Queries against a client path with an overlay view would previously be applied to all matching depot paths, meaning that a command executed against a single file could return two (or more) results. This behavior has been changed so that as a general rule, commands which are expected to return a single result per file will only return one depot result per client file when a client path is used, according to the precedence specified in the client view. Queries against depot paths, or queries which permit multiple revisions to be returned per matching file, are not affected by this change. #2417619 (Job #113622) ** StreamQWorker is now launched at server startup to finish any leftover processing. #2417343 (Job #112669) The Helix Core Proxy installers (.exe and .msi) use the property P4LOG instead of PRXYLOG to specify the name or path and name of the Helix Core Proxy log file. Note that when upgrading from an old version you will need to use the new property name. #2415891 (Job #67312) ** The Remapped field in stream specifications did not allow a target path of "...", i.e., remapping into the root. This has been fixed. #2415279 (Job #94950) ** Improved locking mechanism for the 'p4 unload' operation. #2412791 (Job #113923) ** When using the 'filesys.atomic.rename' configuration, an incorrect journal size might be reported. This has been fixed. #2411873 (Job #114552) ** The performance of 'p4 populate' has been improved by optimising the inserts of integration records. #2409959 (Job #112599) ** An integration from a stream client might fail with an error message "The target stream of a stream spec integration must be the stream associated with the current client ...". This error should only occur when using a '-S' parameter with the integration command, but did sometimes occur when not using '-S' when the parent of the associated stream has a noinherit ParentView setting. This has been fixed. #2409758 (Job #113006) ** The 'p4 client -df' command run on an edge server could result in pending changes that are deleted on the edge but not on the commit server. This would cause the db.change table contents on the commit server to differ from the contents on the edge server. This has been fixed. #2409493 (Job #112877) ** Replication of large transactions is now more efficient. Previously if the upstream server had yet to complete a transaction, replicas could get to the end of the running journal and then restart the replication from the last consistency point; the repeated records would be retained in memory on the replica. Replicas now continue replication of transactions across requests to the upstream server, preventing both repeated network transfers and reducing memory use. #2407879 (Job #113804) ** Depot paths that are overlaid in the client view (i.e. lower in precedence than a +-mapping for the same client path) are now considered read-only, similarly to &-mapped paths, in order to avoid confusion around adding or branching files within ambiguously mapped client paths. #2407742 (Job #113467) ** When a file was opened for 'add' with the exclusive open filetype in a distributed environment and was submitted with the 'reopen' option, the exclusive open type would not be set. This has been fixed. #2405801 (Job #113970) ** Changes to the configuration 'filesys.atomic.rename' now only take effect upon Server startup. After changing this configurable, a 'p4 admin restart' is required. #2405137 (Job #113841) ** When using the SDP to recover a rotated / numbered journal from an active Server, a sharing violation will no longer occur. #2404949 (Job #114063 ) ** If 'p4 license -i' fails due to an IP address change in a license file, the error message now shows both the previous and expected IP addresses. #2403655 (Job #114243) ** Intermediary server (Replica, Proxy, Broker, etc) login no longer leads to the server crash if the commit server starts with an unspecified host address. #2403229 (Jobs #113829, #113840) ** Parallel checkpoint, dump and recovery operations now create a db.ckphist record. p4d now supports the '-xj' option to display db.ckphist records. #2399402 (Job #113830) ** The configurable, 'db.checkpoint.nofiles', that specifies the default split parameter for parallel multifile checkpoint and dump operations has been renamed to 'db.checkpoint.numfiles'. The help page and usage message for 'p4 dbstat' have been updated to reflect this name change. #2398674 (Job #112505) ** The 'p4 group' on a replica working with an older commit server would fail with error: "Unkown field name 'Description'". This change fixes the problem. #2394917 (Job #102021) ** Replication on edge servers after large obliterates suffered from poor performance due to excessive scanning on the db.domain table. The performance issue caused by excessive scanning of the db.domain table has been fixed. #2393897 (Job #113904) ** 'p4 shelve -f -c' no longer leads to the deletion of shared shelve archive files on the replica server. #2393497 (Job #114030) **** Broker now handles MaxMemory when provided by the Helix Core Command Line client (P4). #2393485 (Job #113985) ** Using the '-p' option to 'p4 dbstat' with a worklevel of 1 could cause a server crash. This has been fixed. #2392837 (Job #113967) ** Under certain configuration limitations 'p4 fstat' could throw an exception. This has been fixed. #2392735 (Job #113267) ** For 'p4 sync -E @